CYX24
Piezoresistive Pressure Sensor
SemiConductor Type
Diffused Silicon Pressure Transmitter
Analog Type
Integration
Stainless Steel
Four-Wire
Gas
CE
Customized
5kpa~600kpa
≤1ms
Diffused Silicon Pressure Sensor
(G),(a),(D)
≤ 3.0mA; DC ≤ 10V DC
2.7KΩ ~ 5KΩ
3.0KΩ ~ 6KΩ
Huatian
Standard Package
Tianshui, Gansu, China
Product Description
CYX24 series piezoresistive pressure sensor adopts the internationally advanced high stability and high precision silicon pressure chip, and adopts the sintering seat with stress optimization design, which is produced by the processes of chip mounting, gold wire bonding, diaphragm welding, high vacuum oil injection, pressure cycle stress relief, high temperature aging, temperature compensation, etc. With more than 30 years of development, production experience and technological innovation, the products have excellent stability and performance, and are widely recognized by users.
CYX24 series pressure sensors are used for pressure detection of non-corrosive dry gases.
measurement range: 0kPa~10kPa…400KPa
3 pressure forms: gauge pressure (G), absolute pressure (A), differential pressure(D)
constant current / voltage supply
1.industrial process control
2. gas pressure measurement
3. pressure switch and hydraulic system
4. refrigeration equipment and air conditioning system
5. pharmaceutical and food equipment
4 Technical indicators
4.1 Electrical performance
- power supply: ≤ 3.0ma; DC ≤ 10V DC
- electrical connection: 0.2mm² four color 100mm silicon rubber flexible wire
- common-mode voltage output: 50% of current type input (typical value), 40% of voltage type input (typical value)
- input impedance: 2.7kΩ ~ 5kΩ
- output impedance: 3.0kΩ ~ 6kΩ
- response time (10% - 90%): < 1ms
- insulation resistance: 500MΩ / 100V DC
- allowable overvoltage: 1.5 times of full scale
- shell material: Kovar nickel plating
- pin lead: gilded Kovar
- vibration: no change at 10gRMS, (20-2000) Hz
- constant acceleration: 100g, 11ms
- media compatibility: liquid or gas compatible with 316L and NBR (optional)
- medium temperature: (25 ± 3) ºC
- ambient temperature: (25 ± 3) ºC
- humidity: (50% ± 10%) RH
- ambient pressure: (86-106) kPa
- power supply: (1.5 ± 0.0015) mA DC
| Range | Full scale output (mV) | Pressure form | Range | Full scale output (mV) | Pressure form | |
| 0~10kPa | (50~95) ±20 | G/D | 0~100kPa | (70~110) ±20 | G/A/D | |
| 0~35kPa | (60~100) ±20 | G/A/D | 0~200kPa | (50~105) ±20 | G/A/D | |
| 0~70kPa | (40~80) ±20 | G/A/D | 0~400kPa | (60~130) ±20 | G/A/D |
4.6 Basic parameters
| Parameters | Typical value | Max value | Unit |
| Zero output | ± 1 | ± 2 | mV |
| Nonlinearity | 0.2 | 0.5 | %FS |
| Hysteresis | 0.05 | 0.08 | %FS |
| Repeatability | 0.05 | 0.08 | %FS |
| Input / output impedance | 2.6 | 5.0 | kΩ |
| Zero temperature drift (note 1) | ±0.4 | ±1.0 | %FS, @25ºC |
| Sensitivity temperature drift (note 2) | ±0.4 | ±1.0 | %FS, @25ºC |
| Long-term stability | 0.2 | 0.3 | %FS / year |
| Excitation current | 1.5 (the maximum input voltage can be 10V) | mA | |
| Insulation resistance | 500(100VDC) | MΩ | |
| Compensation temperature (note 3) | 0~50; -10~70 | ºC | |
| Working temperature | -40~+125 | ºC | |
| Storage temperature | -40~+125 | ºC | |
| Response time | ≤1 | ms | |
| Housing and diaphragm material | Valveable nickel plating, fluorosilicone gel | ||
| Measuring medium | Non-corrosive and dry gas | ||
| Life (25 ºC) | > 1 × 108 pressure cycle (80% FS) | times | |
| Note 1 & 2. 0-10kPa zero temperature drift and sensitivity temperature drift: typical value is 0.5% FS @ 25 ºC, maximum value is 1.2% FS @ 25 ºC. Note 3. compensation temperature 0~ 50 ºC for ranges ≤200kPa; - 10ºC~ 70 ºC for ranges >200kPa. Note 4. temperature resistance range of seal ring is - 20 ºC ~ 200 ºC, low temperature performance is poor, When the temperature is lower than - 20 ºC, please verify before using. | |||
5 Model structure selection
5.1 Pressure sensor model selection and outline drawing
| Series | Range | Model | Outline drawing |
| CYX24 | 0kPa~10kPa…400KPa | CYX24-G/A |  |
| CYX24-D |  |
6 Schematic diagram and wiring mode
 |  |
| IN + (red wire) - power supply positive | IN - (black wire) - power supply negative | |
| S + (yellow wire) - output positive | S - (blue wire) - output negative |
7 Application tips
1. pay attention to protect the compensation circuit board at the rear end to avoid touching and affecting the performance of the pressure sensor or causing damage to the core.
2. keep the ventilation pipe at the rear of the G-type sensor connected to the atmosphere; prohibit water, water vapor or corrosive media from entering the reference chamber at the rear of the sensor.
3. avoid dropping, hitting, etc., which can affect the stability of the product.
If there is any change in the pin lead, the label carried by the sensor shall prevail.
Company Information
Tianshui Huatian Sensor Co., Ltd. is a new high-tech enterprise which combined R&D, production, sales with engineering service. It is one of the enterprises which engaged in the integrated pressure sensors and transducers in China. We have passed GB/T 19001-2008 quality management system certification in November 2009.
The Main Products:
CYX series pressure sensors, CYB series pressure transmitter, CYBD series intelligent measurement instrument, CYBK series electronic pressure switches and CW series temperature transmitters.
At present, the company has a number of patents with independent intellectual property rights for the integrated pressure sensors and transducers, which are widely used in industrial automation fields such as coal, oil, electric power, metallurgy, light industries and etc.
The First-Class Equipment:
Laser Trimming Machine; Gold Wire Ball Welding Machine; Shaped Cap Sealing Machine; Laser Welding Machine; High Vacuum Oiling Machine; Precision High Low Temperature Test Box; High Precision Automatic Temperature Compensation System and Automatic Test System and Other Hardware Facilities.
Business Advantages:
One hundred thousand purification plant (3000m2); Pressure sensors, transducers and intelligent digital instrument production line (200000 pieces annual output); A leading domestic OEM oil pressure sensor core body production line (1000000 pieces annual output); High-quality R & D team; Advanced process technology.
We are willing to create a splendid future with customers and partners hand in hand.
Factory Production Equipment
