HPM711
Piezoresistive Pressure Sensor
SemiConductor Type
Diffused Silicon Pressure Transmitter
Analog Type
Integration
Stainless Steel
G
Three-Wire
Customized
Pressure Sensor
-100kPa…0~10kPa…60MPa
Gauge, Absolute
±0.5%FS (Standard) ±0.25%FS (option)
1.5 times the full scale
8~30 VDC, 12~32VDC subject to output type)
4~20mADC(with hart) /0~10VDC/0~5VDC
-40~100ºC;(without cooling element)
-40~150ºC(with cooling element)
±0.4%FS, ±0.3%FS subject to range
-40~100ºC
304, 316L
G1, G1/2
DIN43650, Cable outlet
HangJia
Carton
China
90262010
Product Description
HPM711 flush diaphragm sanitary pressure transmitter uses a flush diaphragm to directly sense the pressure signal, uses a silicon pressure chip as the sensitive element, and uses standard silicone oil or sanitary oil as the pressure transmission medium.
HPM711 with a flat diaphragm is specially designed for measuring viscous, pasty, viscous, crystallized, particle-containing media that can block the pressure channels of conventional process connections. For high-temperature media up to 150°C, this product also has models with integrated radiators to choose from. At the same time, the HPM711 flush diaphragm sanitary pressure transmitter directly feels the pressure due to the exposed diaphragm on the thread end face, which is especially suitable for medical, food industry which has hygienic requirements, and viscous fluid pressure and level measurement and without problems such as scaling, blockage, and sanitation.1. Flush diaphragm structure
2. Hygienic pressure interface
3. Various electrical interfaces
4. Various process connections
| Measuring Medium | Various liquid, gas, or steam compatible with contact material |
| Measuring Range | -100kPa…0~10kPa…60MPa(G) 0~25kPa…10MPa(A) |
| Overload | 1.5 times of full scale |
| Output Signal/Power supply | 4~20mADC/ Vs=8~30 VDC 0~10VDC /Vs=12~30 VDC 0~5VDC /Vs=8.5~30V or 3.1~8 VDC (Higher than max output voltage 0.4V as least) 4~20mADC + HART / Vs =12~32 VDC |
| Accuracy | ±0.5%FS (Standard) ±0.25%FS (option) |
| Long-term Stability | ±0.50%FS/year,≤100kPa ±0.25%FS/year,>100kPa |
| Compensation temperature range | -5~60ºC |
| Temperature Coefficient of Zero | ±0.4%FS/10ºC(in compensation range,≤100kPa) ±0.3%FS/10ºC(in compensation range,>100kPa) |
| Temperature Coefficient of Full Scale | ±0.3%FS/10ºC(in compensation range) |
| Operation Temperature | -40~80ºC |
| Medium Temperature | -40~100ºC(without cooling element) -40~150ºC(with cooling element) |
| Storage Temperature | -40~100ºC |
| Protection Grade | IP65 for DIN43650 electrical connection (code: C1) IP69K for M12*1 electrical connection (code C5) IP67 for cable outlet (code C2) |
| Short circuit protection | Always |
| M12×1,G1/2,without cooling element | DIN43650 ,G1,without cooling element | DIN43650 , G1 Hygienic type, with a cooling element |
 |  |  |
| G1/2 Flush diaphragm (Code: KG12) | G1 Flush diaphragm (Code: KG1) | G1 Hygienic (Code: KHG1) |
| Measuring range:0~2.5…600bar | Measuring range: 0~0.1…25bar | Measuring range:0~0.1…25bar |
 |  |  |
 | Welding socket for G1 Hygienic type |
| Code | Type | ||||||||
| HPM711 | flush diaphragm pressure transmitter | ||||||||
| Range | Measuring Range | ||||||||
| (X1~X2)bar | X1 is the lowest value X2 is the highest value | ||||||||
| Code | Output Signal | ||||||||
| B1 | (4~20)mA | ||||||||
| B3 | (0~10)V | ||||||||
| B4 | (0~5)V | ||||||||
| B5 | (1~5)V | ||||||||
| B15 | (1~10)V | ||||||||
| Code | Process Connection | ||||||||
| KG12 | G1/2 | ||||||||
| KG1 | G1 | ||||||||
| KHG1 | G1 Hygienic | ||||||||
| Code | Electrical Connection | ||||||||
| C1 | DIN43650 | ||||||||
| C2 | Cable outlet | ||||||||
| C5 | M12×1 | ||||||||
| C5X | M12×1 with cable | ||||||||
| Code | Pressure interface material | ||||||||
| S6 | 316L | ||||||||
| X | Customized | ||||||||
| Code | Shell material | ||||||||
| S4 | 304 | ||||||||
| S6 | 316L | ||||||||
| Code | Cooling Element | ||||||||
| Y | With | ||||||||
| N | Without | ||||||||
| Code | Others | ||||||||
| G | Gauge | ||||||||
| S | Sealed gauge | ||||||||
| A | Absolute | ||||||||
| J25 | 0.25G accuracy | ||||||||
| J5 | 0.5G accuracy | ||||||||
| NB | NBR sealing ring | ||||||||
| FK | FKM sealing ring | ||||||||
| ED | EPDM sealing ring | ||||||||
| FF | FFKM sealing ring | ||||||||
| QF | With factory report | ||||||||
| eg: HPM711 | (0~1)bar | B1 | KG1 | C1 | S6 | S4 | Y | G J5 NB | |
Recommended by Seller:
Certification:
FAQ:
1. Q: Are you manufacturer or trading company?
A: We are manufacturer which focuses on sensor for 10 years.
2. Q: What's your quality control system?
A: MC, ISO9001, CE Certificated.
3. Q: What is the warranty of your products?
A: Our warranty time is 18 months after shipment.
4. Q: What is lead time of your product?
A: Normally, our factory lead time is within 10~15 working days for products without customization. You can also check lead time detail with our sales depending on different items.5. Q: Do you provide customized products?
A: Yes, we can laser mark your logo on products; OEM and ODM customization are welcomed.6. Q: What is your MOQ?
A: We have no MOQ limit, small quantity order is acceptable.7. Q: What's the transport?
A: Express such as DHL, FedEx, TNT, UPS for freight prepaid; and we can also use your own courier account to do the freight collect. For more goods we can arrange by air or by Sea.8. Q: What is your terms of payment ?
A: We could accept T/T, Paypal, WU.
A: We could accept T/T, Paypal, WU.
