Model NO.
CYX19-IIC
Output Signal Type
Analog Type
Production Process
Integration
Material
Stainless Steel
Wiring Type
Four-Wire
Measuring Medium
Liquid
Certification
CE
Customized
Customized
Transport Package
Standard Package
Trademark
Huatian
Origin
Tianshui, Gansu, China
HS Code
9026209090
Production Capacity
500, 000PCS/Year
Type:
Piezoresistive Pressure Sensor
Component:
SemiConductor Type
For:
Diffused Silicon Pressure Transmitter
Function
The sensor can transfer the measurement signals of temperature, pressure and liquid level to I2C digital output. With the fast and accurate interface, the sensor is used to build an Internet of Things using a microcontroller. It can read data and control power on and off to reduce power consumption through microprocessor operation.Feature
- Digital compensation for sensor offset, sensitivity, temperature drift and nonlinearity
- 32-bit customer ID field for module traceability
- Digital output of temperature and pressure in I2C bus mode
- Fast power-on to data output response: 3ms
- Low power consumption, sleep mode operation, as low as 5 μ A, current consumption depends on the programmed sampling rate
- Operating temperature: -40°C to + 85°C
- Wide supply voltage capability: 3.3V/5V
Performance
| Range | -100kPa…0kPa~10kPa…100MPa | Pressure form | Gauge / Absolute |
| Power supply | 5±0.1V DC or 3.3±0.1V DC | Accuracy | ±0.5%FS (pressure) ±0.5ºC (temperature) |
| Overload | 2 times full pressure scale | Long term stability | ±0.2%FS/year |
| Operating temperature | -40ºC~85ºC | Storage temperature | -40ºC~125ºC |
Material
- Diaphragm: stainless steel 316L / titanium TA1
- Shell: stainless steel 316L / titanium TC4
- Pressure lead-in tube: stainless steel 316L
- Pin lead: gilded Kovar
- Sealing ring: NBR, Viton (optional)
Connection
| VCC | SCL | SDA | GND |
| red | yellow | blue | black |
Data measurement acquisition operation
1. For read and write operations, the master device commands to start, and sends an ACK(acknowledgement) as a slave device to indicate success. The factory address of the slave device is 0x28, and the communication sequence is shown in Figure 3.
2. Read data sequence is as follows(Figure4, 5)
Figure 3
Figure 4
Figure 5
3.Read pressure typical value| Parameters | Typ | Unit |
| Zero pressure output (5%) | 333 | hex |
| Zero pressure output (10%) | 666 | hex |
| Full-scale pressure output (90%) | 399A | hex |
| Full-scale pressure output (95%) | 3CCB | hex |
Structure
| Range | Outline drawing |
| -100kPa~10MPa |  |
| 25MPa~100MPa |  |
Send Message
