Cooperative robot high output torque density 5KW heavy industrial reducer: installed with radial thrust ball bearings, so it can support external load, torque rigidity, allow torque is large, can reduce the number of components required, easy installation. The revolution speed of WRV gears is slower and vibration is reduced, which can reduce the motor structure (input gear) and inertia.
WRV-E series Cooperative robot high output torque density 5KW heavy industrial reduce Features:
1, the main bearing built-in mechanism
Improved reliability; Total cost reduction; Installed with radial thrust ball bearings, so it can support external load, torque rigidity, large allowable torque, can reduce the number of components required, easy installation.
2, 2 speed reduction mechanism
The vibration is small, the revolution speed of WRV gear is slow, and the vibration is reduced, which can reduce the straight junction part of the motor (input gear) and reduce the inertia.
3, double column support mechanism
Large torsional rigidity, small vibration, strong impact resistance; The crank shaft in the reducer is supported by two columns.
4. Rolling contact mechanism
Excellent starting power, small wear, long life; Small backlash (1arc.min); Use rolling bearings.
5, pin gear mechanism
Small backlash (1arc.min); Strong impact resistance; WRV gears and pins have more simultaneous bites.
| Model number | WRV-6E | WRV-20E | WRV-40E | WRV-80E | WRV-110E | WRV-160E | WRV-320E | WRV-450E |
| Deceleration ratio | 31-103 | 57-161 | 57-153 | 57-153 | 81-175 | 81-171 | 81-185 | 81-192 |
| Rated torque | 196 | 882 | 1666 | 2156 | 2940 | 3920 | 7056 | 8820 |
| Instantaneous maximum allowable torque Nm | 392 | 1764 | 3332 | 4312 | 5880 | 7840 | 14112 | 17640 |
| Maximum backgap Arc-min | ≤1.5 | ≤1 | ≤1 | ≤1 | ≤1 | ≤1 | ≤1 | ≤1 |
A: When sealing appropriate amount of grease and running reducer, the standard replacement time is 20000 hours according to the aging condition of the grease. In addition, when the grease is stained or used in the surrounding temperature condition (above 40ºC), please check the aging and fouling of the grease, and specify the replacement time.
Q: Delivery time
A: Fubao has 2000+ production base, daily output of 1000+ units, standard models within 7 days of delivery.
Q: Reducer selection
A: Fubao provides professional product selection guidance, with higher product matching degree, higher cost performance and higher utilization rate.
Q: Application range of reducer
A: Fubao has a professional research and development team, complete category design, can match any stepping motor, servo motor, more accurate matching.
