JK60HS111-2008
3D Printer
Low Speed
Two-Phase
HB-Hybrid
Driving
2
Two Phase
Magnetic-Electric
ISO9001, CCC, CE, RoHS, ISO
Jkongmotor
Jk60HS
88mm
15n
75n
80 Degree Max.
0.02mm Max. (450g Load)
0.08mm Max. (450g Load)
20%
7.5mm D Shaft
3.3kg.Cm
Jkongmotor
Inner Pack and Poly and Master Carton and Pallet
4pcs per carton
Jiangsu Changzhou
8501109990
Product Description
General Specification:
Step Angle Accuracy: ±5%
Resistance Accuracy: ±10%
Inductance Accuracy: ±20%
Temperature Rise: 80°C Max
Ambient Temperature: -20°C~+50°C
Insulation Resistance: 100MΩ Min., 500VDC
Dielectric Strength: 500VAC for one minute
Shaft Radial Play: 0.02Max (450g-load)
Shaft Axial Play: 0.08Max (450g-load)
Specification
| Model No. | Motor Length | Current /Phase | Resistance /Phase | Inductance /Phase | Holding Torque | # of Leads | Detent Torque | Rotor Inertia | Mass | ||
| (L)mm | A | Ω | mH | N.m | No. | g.cm | g.cm | Kg | |||
| JK60HS56-2008 | unipolar | 56 | 2 | 1.8 | 3. | 1.17 | 8 | 700 | 300 | 0.77 | |
| parallel | 2.8 | 0.9 | 3.6 | 1.65 | |||||||
| Series | 1.4 | 3.6 | 14.4 | 1.65 | |||||||
| JK60HS67-2008 | unipolar | 67 | 2 | 2.4 | 4.6 | 1.5 | 8 | 900 | 570 | 1.2 | |
| parallel | 2.8 | 1.2 | 4.6 | 2.1 | |||||||
| Series | 1.4 | 4.8 | 18.4 | 2.1 | |||||||
| JK60HS88-2008 | unipolar | 88 | 2 | 3 | 6.8 | 2.2 | 8 | 1000 | 840 | 1.4 | |
| parallel | 2.8 | 1.5 | 6.8 | 3.1 | |||||||
| Series | 1.4 | 6 | 27.2 | 3.1 | |||||||
| JK60HS100-2008 | unipolar | 100 | 2 | 3.2 | 6.4 | 2.8 | 8 | 1100 | 980 | 1.7 | |
| parallel | 2.8 | 1.6 | 6.4 | 4.0 | |||||||
| Series | 1.4 | 6.4 | 25.6 | 4.0 | |||||||
| JK60HS111-2008 | unipolar | 111 | 2.0 | 4.4 | 8.3 | 3.2 | 8 | 1200 | 1120 | 1.9 | |
| parallel | 2.8 | 2.2 | 8.3 | 4.5 | |||||||
| Series | 1.4 | 8.8 | 33.2 | 4.5 | |||||||
(unit=mm)
