Modificated Air Inlet M12*1.5 Cross 2B7550 Guomat Air Spring Assembly
Specifications and Tecnical Data
1. Nut/blind nut Top plate screw (nut) teeth: M12×1.5;M20×1.5
Top plate screw center distance : 157mm
2. Bottom cover plate screw (nut) teeth: 2 x M10
Bottom plate screw center distance : 157 mm
2. Air hole/air inlet/air fitting air hole/air inlet: M12×1.5
The Screw is combined with the Air Inlet
3. Top plate diameter (width): 224.5mm, bottom cover diameter (width): 224.5 mm
4. Rubber bellows Max. diameter: 343mm
5. Min height: 104mm
Max. height: 363mm
6. Bumper block/bumper block with bumper
7. Belt loop/girdle ring/girdle hoop: with one piece of belt loop/girdle hoop/girdle ring
Packing Details
| Net Weight | Gross Weight | Box Weight | Box Size | Packing Quantity |
| 7.24kg | 7.82kg | 0.58kg | 33*33*22cm | 1 |
Application
Industrial washing machine
hopper
Pipe Thread Maker
Precision instrument table
conveyor
Belt lift tensioner
Web Assembly Machine
Mold Separator
glue applicator
Straightening machine
leather machinery and so on
About Air Spring
Rubber air spring
The rubber air spring is a kind of rubber element that is formed by the cord layer, the inner and outer rubber layer or the steel wire ring after being formed and vulcanized to form a flexible body, which realizes the elastic function by using the compressibility of inflated air. Commonly known as air springs, rubber air bags, air bags, etc.
Rubber air spring assembly
The rubber air spring, the upper base, the lower base (piston) and the buffer pad are assembled to form a whole with a closed air chamber.
Load capacity
The size of the outward thrust of the rubber air spring assembly through the end faces of the upper and lower bases under certain internal pressure and height conditions, that is, the size of the outward extension of the rubber air spring.
Assembly design height
A distance set between the upper and lower base end faces of the rubber air spring assembly. This distance is the origin of the deformation of the rubber air spring, and the rubber air spring vibrates up and down at the origin when it works.
Working pressure
The air pressure allowed to be charged into the rubber air spring at the design height of the assembly is generally selected within the range of 0.4-0.8MPA.
Maximum height
The rubber air spring assembly is the maximum allowable height that can be stretched after charging the maximum working air pressure at the design height.
Minimum height
The height of the rubber air spring assembly when it is compressed to the limit position after being charged with the maximum working air pressure at the design height.
The related picture of air spring/pneumatic cylinder
Company Profile
Guangzhou Guomat air spring Co., Ltd. was established in 2008 and is located in Guangzhou, the capital city of Guangdong Province. The company's production plant covers an area of 20,000 square meters and is located in Taihe Town, Baiyun District, Guangzhou City. With the continuous development of the company, it is gradually equipped with modern workshops and advanced rubber air spring equipment. It is one of the important air spring production bases in China. At the same time, Gomart used domestic advanced air spring processing equipment and introduced foreign air spring production technology, combined with the company's unique production process, and strictly implemented production in accordance with international standards to produce advanced products. All products comply with ISO9001, ISO/IS16949 standards.
The main products of Guangzhou Guomat air spring Co., Ltd. are: rubber air springs, air suspension springs, rubber air springs for automobiles, airbags for passenger cars and trucks, industrial air springs, etc. The products cover buses, luxury cars, trucks, Commercial vehicles, rail vehicles, industrial machinery, industrial equipment and other industries. The company has hundreds of models and styles of products. At the same time, it can also carry out directional transformation and design of products according to the special needs of users, providing users with one-stop service.
Factory workshop
FAQ
Q1:Can you produce the product according to the samples?
A: Yes, we can produce by your samples or technical drawings. We can build the molds and fixtures.
Q2: What is your sample policy?
A: We can supply the sample if we have ready parts in stock, but the customers have to pay the sample cost and the courier cost.
Q3: What certification does your product pass?
A: Our products are certified to ISO/TS16949:2009 international quality standards. Please rest assure that we have very strict Quality Control Systems.
Q4 : Can I use my own logo?
A:Sure. We can do as per the customer's requirements.
