RR Load LS20 Concoluted Lifting Equipment Pneumatic Rubber Air Springs
Cross Reference
RR Load LS20
Triangle 6325
Triangle 4504
Fire-stone W01-358-6926
Fire-stone WO13586926
Fire-stone WO1-358-6926
Fire-stone W013586926
FIRE-STONE W01-358-6926
FIRE-STONE WO13586926
FIRE-STONE WO1-358-6926
FIRE-STONE W013586926
Contitech FD 200-19 504
Contitech FD 200 19 504
Contitech FD200-19 504
Contitech FD200 19 504
Contitech FD20019 504
Contitech 161299
Specifications and Detailed Technical Parameters:AIRSUSTECH 2B6926
Nut/blind nut
Top plate screw (nut) teeth:2X3/8-16UNC
The screw center distance of the top cover plate: 89mm
Screw (nut) teeth of the bottom cover plate: 2X3/8-16UNC
The screw center distance of the bottom cover plate: 89 mm
Air hole/air inlet/air fittings
Air hole/air inlet: 1/4NPTF
The screw center distance between the air hole and the nut: 38mm
Cover plate
Top plate diameter: 160 mm
Diameter of the bottom cover: 160mm
Bell rubber bellows
Rubber bellows diameter: 224mm(MAX251)
The Maximum Height: 274mm
The Minimum Height: 95 mm
Bumper block/bumper block
With bumper block
Belt loop/Girdle hoop/Girdle ring
One piece of belt loop/girdle hoop/girdle ring
Min. pressure: 0bar
Return force to min.height: ≤200N
Overall weight with clamped plates: 3.2kg
Vibration isloation-dynamic characteristic values
Design height H: recommended 220mm, minimum 205mm
| Pressure p [bar] | 3 | 4 | 5 | 6 | 7 | 8 | Vol. V [l] |
| Force (Load) [KN] | 6.1 | 8.2 | 10.3 | 12.5 | 14.5 | 16.5 | 6.0 |
| Spring rate [N/cm] | 750 | 960 | 1110 | 1340 | 1510 | 1730 | |
| Natural frequency [Hz] | 1.8 | 1.7 | 1.7 | 1.6 | 1.6 | 1.6 |
Pneumatic application-static characteristic values
Force F[KN]
| Pressure p [bar] | 3 | 4 | 5 | 6 | 7 | 8 | Vol. V [l] | |
| Height H[mm] | 250 | 4.9 | 6.6 | 8.2 | 9.5 | 11.7 | 13.4 | 6.5 |
| 210 | 6.7 | 8.8 | 11.0 | 13.3 | 15.5 | 17.6 | 5.8 | |
| 170 | 7.9 | 10.5 | 13.1 | 15.7 | 18.3 | 20.7 | 4.9 | |
| 130 | 9.1 | 12.0 | 15.0 | 17.8 | 20.7 | 23.4 | 4.0 | |
| 90 | 9.9 | 13.2 | 16.6 | 19.8 | 23.0 | 25.8 | 2.9 | |
Application of Guomat rubber air spring in lifting equipment
The working principle of the air spring is to fill the retractable airtight container with compressed air and use the spring of the elastic effect of the air. Air springs are commonly known as airbags, airbag cylinders, airbag cylinders, etc.
Traditional lifting equipment uses air cylinders or hydraulic cylinders to lift objects, which requires a large installation space, is difficult to manufacture, heavy in weight, prone to leakage and inconvenient to maintain. After using the rubber air spring as the lifting element of the lifting equipment, the traditional shortcomings of the lifting equipment are overcome, maintenance is not required, the service life is long, and the operation and replacement are convenient. Therefore, rubber air springs are gradually replacing cylinder products on lifting equipment.
The related picture of 2B6926
Company Profile
Guangzhou Guomat air spring Co., Ltd. was established in 2008 and is located in Guangzhou, the capital city of Guangdong Province. The company's production plant covers an area of 20,000 square meters and is located in Taihe Town, Baiyun District, Guangzhou City. With the continuous development of the company, it is gradually equipped with modern workshops and advanced rubber air spring equipment. It is one of the important air spring production bases in China. At the same time, Gomart used domestic advanced air spring processing equipment and introduced foreign air spring production technology, combined with the company's unique production process, and strictly implemented production in accordance with international standards to produce advanced products. All products comply with ISO9001, ISO/IS16949 standards.
The main products of Guangzhou Guomat air spring Co., Ltd. are: rubber air springs, air suspension springs, rubber air springs for automobiles, airbags for passenger cars and trucks, industrial air springs, etc. The products cover buses, luxury cars, trucks, Commercial vehicles, rail vehicles, industrial machinery, industrial equipment and other industries. The company has hundreds of models and styles of products. At the same time, it can also carry out directional transformation and design of products according to the special needs of users, providing users with one-stop service.
Factory workshop
FAQ
Q1:Can you produce the product according to the samples?
A: Yes, we can produce by your samples or technical drawings. We can build the molds and fixtures.
Q2: What is your sample policy?
A: We can supply the sample if we have ready parts in stock, but the customers have to pay the sample cost and the courier cost.
Q3: What certification does your product pass?
A: Our products are certified to ISO/TS16949:2009 international quality standards. Please rest assure that we have very strict Quality Control Systems.
Q4 : Can I use my own logo?
A:Sure. We can do as per the customer's requirements.
