Model NO.
NX110-7L
Discharging Type
Constant Current
Electrolyte
Acid Battery
Certification
ISO9001, RoHS, CE
Brand
Power Energy
Size
260X175X220mm
Colour
White
Material
ABS
Transport Package
Carton/Pallet
Specification
CE/ROHS
Trademark
POWER ENERGY
Origin
China
HS Code
85071000
Production Capacity
600000/Year
Type:
Lead-acid Battery
Rated Voltage:
12V
Charging Voltage:
1.45V~1.5V
Working Voltage:
1.5V~1.1V
Charging Type:
Constant Current
Wet Shelf Life:
1Year
Dry charged lead acid car battery NX110-5L
12V70AH
310X170X210X235MM
LAYOUT: 0
TERMINAL: A
Weight: Kgs
The Characteristic ,Usage and Maintenance of Dry Charged Automobile Battery
1. Battery should be stored in a clean ,dry ,drsught room with 5-40 degrees.
2: surface of battery and pole pillar should be kept clean.
3:the electrolyte density poured into at the first time and the first charging should be done under the instruction .During the usage ,the surface will reduce,please add some water up to the former level.(if the electrolyte flows out, pls add some with same density)
4:when not use the battery ,take it off from the car ,and recharge it so as to prolong its use life.
5:charge the battery under the following condition:
1)the density is less than 1.10
2)the light is faint
3)when dicharging ,voltage of terminal is less than 10.8V.
12V70AH
310X170X210X235MM
LAYOUT: 0
TERMINAL: A
Weight: Kgs
MODEL | VOLTAGE | CAPACITY | TERMINAL | LAYOUT | WEIGHT |
| NX110-5L | 12 | 60 | A | 0 | 12 |
The Characteristic ,Usage and Maintenance of Dry Charged Automobile Battery
1. Battery should be stored in a clean ,dry ,drsught room with 5-40 degrees.
2: surface of battery and pole pillar should be kept clean.
3:the electrolyte density poured into at the first time and the first charging should be done under the instruction .During the usage ,the surface will reduce,please add some water up to the former level.(if the electrolyte flows out, pls add some with same density)
4:when not use the battery ,take it off from the car ,and recharge it so as to prolong its use life.
5:charge the battery under the following condition:
1)the density is less than 1.10
2)the light is faint
3)when dicharging ,voltage of terminal is less than 10.8V.
Send Message
