Model NO.
330F
Wiring Type
Four-Wire
Measuring Medium
Liquid
IP Rating
IP68
Certification
RoHS
Customized
Customized
Transport Package
Foam+Carton
Specification
dia. 19mm
Trademark
Runpaq
Origin
China
Type:
Piezoresistive Pressure Sensor
Component:
SemiConductor Type
For:
Diffused Silicon Pressure Transmitter
Output Signal Type:
Analog Type
Production Process:
Integration
Material:
Stainless Steel
Ceramic Flush Diaphragm Pressure Transmitter for fuel station
Flush Diaphragm Pressure Transmitter is designed to be installed in a series of hazardous situation and is ideal for use in food, beverage sanitary, medical process and industrial applications where the media is either viscous, contains particulates or solids, which may probably cause the clog or foul.
Electrical connections and dimensions
Dimensions
Specifications
Remarks: 1MPa=10bar; 1bar≈14.5PSI; 1PSI=6.8965kPa; 1kgf/cm2=1atm; 1atm≈98kPa
Model selections
Flush Diaphragm Pressure Transmitter is designed to be installed in a series of hazardous situation and is ideal for use in food, beverage sanitary, medical process and industrial applications where the media is either viscous, contains particulates or solids, which may probably cause the clog or foul.
| Application | Key features |
| • Fuel station • Gas dispenser • Food process • Hygiene industry • Pressure instrument • Medical • biological products • RO water purification • Water treatment, sewage treatment | • Accuracy:±0.5%F.S • OEM, Un-standard order available • Can install display screen:4LCD • Zero position and full scale can adjusted • Kinds of pressure range and signal output • Kinds of connection and pressure port • Non-polarity two wires output |
Electrical connections and dimensions
| DIN43650C |
| U+ / I+ = 1 |
| U- / I- =2 |
| S + = 3 |
| Shield = 4 / Housing |
| Cable wiring |
| U+ / I+ = Red |
| U- / I- = Black |
| S+ = Green / Blue |
| Shield = Housing |
DimensionsSpecifications
| Measuring range | 0~35kPa...3.5MPa | Temp. coefficient of span | ±0.02%FS/°C(typ.) ±0.03%FS/°C(max.) | |
| Overload pressure | 1.5 times of rated pressure or 110MPa(min. value is valid) | Compensated temperature | -10~+70°C | |
| Pressure type | Gauge (G), Absolute (A), Sealed gauge (S) | Operating temperature | -20°C~80°C | |
| Accuracy | ±0.25%F.S /±0.5%F.S | Storage temperature range | -40°C~120°C | |
| Stability | ≤0.3%FS/year | Insulating resistance | ≥100MΩ@100Vdc | |
| Working temperature | -20~85ºC, (-40~150ºC with radiator) | Pressure connection | M20x1.5,G1/2 (customer request) | |
| Temp.coefficient of zero | ±0.02%FS/°C(typ.) ; ±0.03%FS/°C(max.) | Electrical connection | DIN43650 | |
| Diaphragm material | SS316L | Medium compatibility | All corrosive medium compatible with 1Cr18Ni9Ti | |
| Protection | IP65 | Response time(10%~90%) | ≤10ms | |
| Electric parameters | two wires | three wires | ||
| Output signal | 4 ~ 20 mA | 0 ~ 5 V | 1 ~ 5 V | 0 ~ 10 V |
| Power supply | 8 ~ 30 VDC | 8 ~ 24 VDC | 8 ~ 24 VDC | 11 ~ 30 VDC |
| Load resistance | R≤(U-15)/0.02 (for 4/20mA) | R>100kΩ(for voltage output) | ||
Model selections
Send Message
