Model NO.
T383
Wiring Type
Four-Wire
Measuring Medium
Liquid
IP Rating
IP68
Certification
RoHS
Customized
Customized
Transport Package
Foam+Carton
Specification
dia. 19mm
Trademark
Runpaq
Origin
China
Type:
Piezoresistive Pressure Sensor
Component:
SemiConductor Type
For:
Diffused Silicon Pressure Transmitter
Output Signal Type:
Analog Type
Production Process:
Integration
Material:
Stainless Steel
Piezoresistive Silicon Die Pressure transmitter for Construction Machinery Industry
T383 line is industrial pressure transmitter, featuring heat-resistance, wide range and high stability. The product is widely used for the measurements of gas and liquid, such as water, oil and light corrosive liquid and gas. Adopting 1Cr18Ni9Ti stainless steel construction and the professional V/I converting circuit, T383 line is easy for zero/span trim.
Wiring diagrams
Dimensions
Specification
Notice:1MPa=10bar; 1bar≈14.5PSI; 1PSI=6.8965kPa; 1kgf/cm2=1atm; 1atm≈98kPa
Model selections
T383 line is industrial pressure transmitter, featuring heat-resistance, wide range and high stability. The product is widely used for the measurements of gas and liquid, such as water, oil and light corrosive liquid and gas. Adopting 1Cr18Ni9Ti stainless steel construction and the professional V/I converting circuit, T383 line is easy for zero/span trim.
| Application | Key features |
| • Construction Machinery • Automobile engines • High-pressure common-rail engine • Hot and Cold environment • Deep well hydraulic detection • Boiler pressure detection • Natural gas storage equipment • Hydraulic lubrication | • Pressure type: Gauge Pressure • Range: 0~5MPa~80MPa • Accuracy: ±0.5%F.S • Stability0.2%F.S/Year(typical), 0.4%F.S/Year(maximum) • Customized working temperature: -40ºC~150ºC • Signal Output:4~20mA, 1~5V, 0.5~4.5V • Power supply: 8/10~30Vdc, 5V(Ratio) • Sputter film sensor • OEM: Available |
Wiring diagrams
| Electric connect | ||||
| Cable | two wires | three wires | Hirschmann | GX16-7 |
| Red | power supply | power supply | 1 | 1 |
| Blue/Green | output | output | 2 | 2 |
| Black | shield | GND | 3 | 3 |
| Yellow | - | shield | GND | 4 |
| Signal output | ||||
| Two wires | 4~20mA | |||
| Three wires | 0~5V, 0~10V, 1~5V, 0.5~4.5V, | |||
Specification
| Measure range | 0~5MPa…80MPa | Insulation | >100MΩ@50V | ||
| Overload pressure | 2 times of rated pressure | Electric strength | 500V @60second | ||
| Burst pressure | 10 times of rated pressure ±0.5/55ºC | Vibration/shock | 10g/5~2000Hz, axes X/Y/Z20g sine 11ms | ||
| Accuracy | ±0.5%F.S | Pressure type | GP | ||
| Stability | 0.2%F.S/Y, 0.4%F.S/Ymax | Response time | 10 mS | ||
| Work temp. | -40~150ºC; | Pressure durability | 1 x 108 pressure cycle@25ºC | ||
| Compensate temp. | -20~120ºC | Safety level | Intrinsically Safe E; Explosion-proof D | ||
| Medium compatibility | All 1Cr18Ni9Ti-compatible corrosive mediums | EMC | EN50081-1/-2; EN50082-2 | ||
| Electric parameter | two wires | three wires | |||
| Output signal | 4~20mA | 0~5Vdc | 0~10Vdc | ||
| Power supply | 10~30Vdc | 8~30 Vdc/ac | 5Vdc (Ratio) | ||
| Load | (U-10)/0.02(Ω) | > 100k Ω | |||
| Electric connect | DIN43650, IP65; GX 16-7, IP45; Wire jacket connection, IP68; Waterproof connection; | ||||
| Pressure connect | M20 x 1.5, G1/4, G1/2, NPT1/2, R1/2 | ||||
Model selections
Send Message
