PCM-L10S200-C49
3s to 10slithium Ion Batteries
150A
Canbus/Smbus/RS232/RS485/Bluetooth
to Read Battery Data on APP (Voltage, Current,etc)
to Read Battery Data (Voltage, Current, Temp,.etc)
to Read Battery Data(Voltage, Current, Temp,.etc)
7-15 Working Days
L230*W140*T35mm
Share a Common Port
Yes
ISO9001, CE, UL, MSDS
Customized
SmarTEC
Antistatic Bag
For Li-ion/LiFePO4 battery
Shenzhen
8506500000
Product Description
SmarTEC Battery PCM Active Balance BMS Pre-Charge with Smart Bluetooth APP 3s 4s 6s 7s 8s 9s 10s 12V 10A 20A 100ah Protection Board with Monitoring Via Smbus/RS232/RS485
| Part name: | PCM-L04S100-J99 | Size: | 190*110*11mm |
| Apply: | 12V 100Ah 12V 120Ah 12V 150Ah | Max. Cont. charge/discharge current: | 100A |
| Communication protocols interfaces: | 2-way UART, and RS485 | Charge & discharge share the same common port | |
Features of PCB:
Supports 4pcs*12V batteries in series
Pre-charge function for charge/discharge
Support sorts of communications. RS232,RS485,UART comunication
2 UART communication ports for expansion RS485 and CAN
Supports 5 channels of temperature detection (103AT) with a low-temperature heating function
Support smart mobile Bluetooth app communication
Designed with BQ7692003+MCU
| It is integrated with the smart learning style of computation coordinated with integrating Coulometer with more correct SOC of the battery. | |||||
| Multifunctional safety protection of overcharge, over-discharge, over current, and short-circuited, temperature. | |||||
| Battery charge and discharge over/under temperature are settable with an external NTC (103AT). The setting parameter at the same time should be uploaded to the communication Host. | |||||
| It has a balancing function under the state of charging. | |||||
| The FET temperature is lower than 90ºC after discharging for over 1 hour at 200A under an ambient temperature of 30ºC. | |||||
| Communication Protocol. |
No. | Item | Protection parameters | Whether it can be set/Yes or No | Noted | |
1 | Single-cell over Charge protection | 1-stage overcharge protection voltage | 3750±100mV | Yes | |
| 1-stage overcharge protection delay | 2 S | Yes | |||
| 2-stage overcharge protection voltage | 4000±100mV | Yes | |||
| 2-stage overcharge protection delay | 2 S | Yes | |||
Single-cell overcharge relieve | 1-stage overcharge release voltage | 3500±100mV | Yes | ||
| 2-stage overcharge release voltage | 3500±100mV | Yes | |||
| Discharge relieve | I≥1000mA | Yes | |||
2 | Single cell over discharge protection | Stage 1 over-discharge protection voltage | 2300±100mV | Yes | |
| Stage 1 over-discharge protection delay | 2 S | Yes | |||
| Level 2 over-discharge protection voltage | 2000±100mV | Yes | |||
| Level 2 over-discharge protection delay | 2 S | Yes | |||
Single cell over-discharge relieve | 1-stage over-discharge release voltage | 2500±100mV | Yes | ||
| 2-stage over-discharge release voltage | 2500±100mV | Yes | |||
| Charging relieve | I≥200mA Access charger I≥ 200mA | No | |||
3 | OCC Charge over-current protection OCC | Charge over-current protection current | 130±10A | Yes | |
| Charge over-current protection delay | 2 S | Yes | |||
Charging over-current protection relieve | The time of OCC self-recoveries | 10 S | Yes | REST and REST Automatically restore the locked state after 3 times, remove charger or software REST or switch REST | |
| The number of OCC self-recoveries | 3 times | No | |||
OCC unlocked after locking | REST REST Remove charger or software REST or switch REST | No | |||
4 | OCD Discharge | Discharge over-current 1 protection current | 200±20A | Yes |
| 5 | Cell temperature protection | Discharge low temperature protection delay | 2 S | Yes |
| Discharge cryogenic protection recovery | -10±3ºC | Yes | ||
6 | MOS over-temperature protection | MOS over-temperature protection OTF | 95±3ºC | Yes |
| MOS over-temperature protection delay | 2 S | Yes | ||
| MOS over-temperature protection recovery | 60±3ºC | Yes | ||
| 7 | Balance | Open condition | charge | NO |
| Open voltage | 3300 mV | Yes | ||
| Turn on the differential pressure | 100 mV | Yes | ||
| Shut off the differential pressure | 30 mV | Yes | ||
| Balance the current | 50±5mA | No | ||
8 | Pre-charge | Open voltage | 2000 mV | Yes |
| Shut off voltage | 2500 mV | Yes | ||
| Pre charge current | ≤180mA | No | ||
9 | Pre-discharge | Turn on the condition | AOLD or trigger 1 time AOLD | Yes |
| Time for pre-discharge | 5 S | Yes | ||
| Discharge current | ≤250mA | No |
| Main Products | ||
 |  |  |
| Solar Battery | OEM&ODM Lithium Battery | Solar Street Light Battery |
 |  |  |
| Solar Energy System | Electric Vehicle Battery(RV/Marine/Golf Cart ) | BMS & PCM |
Quick Questions
Q: Is OEM/ODM battery pack available?
A: Yes, OEM/ODM battery packs are warmly welcome. We have a professional R&D Team to provide you with technical support.
Q: What information do you need before making a customized battery pack?
1. Size of the battery pack
2. Voltage of the battery pack
3. Capacity of the battery pack
4. Max continuous discharge / working current
5. Cable and connector types
6. Whether communication or Bluetooth APP is needed.
Q: Can you print my logo on the battery cover?
A: Yes, a custom logo is available.
Q: Is the sample order acceptable?
A: Yes, sample orders for quality test is acceptable.
Q: How should I place an order?
A: we will issue a formal invoice to you and you just make the payment .then your order will be processed at once after got it.
Q: How should I pay? Which terms of payment do you accept?
A: T/T, Paypal, Western Union, D/P, L/C.
Q: How to ship out the batteries?
A: We have good partners to arrange the shipments to all countries. Although batteries are categorized as dangerous goods, you should rest assured that your cargo will be delivered through our experienced shipping partner(s).
Q: Do you have the documents required for battery shipments?
A: Yes, we have MSDS, UN38.3 for single cells, and other special files needed for shipments to some regions can also be applied for you.
