B666
Video Call, Online & Face to Face Service and Trai
14months
Off-Car Type
Small Size Wheel
Vertical Type
Dynamic Balance, Static Balance, Wheel Balance, Motorcycle Balance, Well Balanced, Auxiliary Implicit Procedure, Calibration Procedure
<70db(A)
New
70kg
220V 50Hz 1pH, 0.25kw
1g
200r/Min
1.5
About 8s
1.5-35"
8-30"
1000mm
70dB
N.W:105kg G.W:130kg
1000*650*1150mm
YuanMech
Plywood
1000*650*1150mm
Yingkou, Liaoning, China
90311000
Product Description
3D Computer Wheel Balancer Machine with Laser Point China Factory
2. For wheel balancer machine, what are the common causes of chasing weight problem?
The wheel is not centered properly so it wobbles during rotation which cause chasing weight.
The weight is not placed in correct position in Alu mode, especially on the inner plane.
Lost accuracy and require calibration.
3. For wheel balancer machine, what are the difference between static imbalance and dynamic imbalance?
A static imbalance exists when the tire has a heavy part. The dynamic imbalance is different. A dynamic imbalance exists when a tire has two heavy parts which are located diagonally.
4. What are the common test programs inside wheel balancer machine software?
Common tests are: piezoelectric sensor test, Encoder test, Distance/Diameter/Width measurement sensor test, keyboard test, display test, motor test (Please contact us if you have more questions on this topic)
5. What are common problem when using motorcycle adaptor?
The common problem with motorcycle/adaptor is the shaft strength. With heavy or big wheel, the thin shaft jumps during rotation, which cause a bad balancing result. (Please contact us if you have more questions on this topic)
| Max wheel weight | 70Kg |
| Power | 220V 50HZ 1PH,0.25kw |
| Balance accurancy | ±1g |
| Balance speed | about 200r/min |
| Position accurancy | 1.5° |
| Balancing speed | about 8s |
| Rim diameter | 8-30" |
| Tire width | 1.5-35" |
| Wheel diameter | 1000mm |
| Noise | ≤70dB |
| N.W./G.W. | N.W:105kg G.W:130kg |
| Package size: | 1000*650*1150mm |
1. A bright and easy to read LCD display.Easier on the eyes, and this will make operatingthe machine much easier.
2. High-volume top weight tray, strong and durable.
3. Long Shaft for the Wheel Balancing. The distance from the machine to the hub is 260mm. For a Wide Application Range.
4. User-friendly distance meansurement guage savers working time and minimize errors. 
5. The piezoelectric sensors offering superior stability and fatigue resistance for unlimited service life.
6. Powerful and quiet motor provides strong torgque. 
7. Side cone storage pegs keeps accessories readilyavailable
8. Lengthened body base provide more stability whenworking with big wheels.
1. How to make sure the calibration is performed successfully?
Use a well-balanced calibration wheel. After calibration leave the wheel on, run the wheel in Dynamic mode several times, and apply random weight both inside and outside. Check if the wheel balancer machine show the weight and if the weight is always at 6 o'clock position. (Please contact us if you need operation video)2. For wheel balancer machine, what are the common causes of chasing weight problem?
The wheel is not centered properly so it wobbles during rotation which cause chasing weight.
The weight is not placed in correct position in Alu mode, especially on the inner plane.
Lost accuracy and require calibration.
3. For wheel balancer machine, what are the difference between static imbalance and dynamic imbalance?
A static imbalance exists when the tire has a heavy part. The dynamic imbalance is different. A dynamic imbalance exists when a tire has two heavy parts which are located diagonally.
4. What are the common test programs inside wheel balancer machine software?
Common tests are: piezoelectric sensor test, Encoder test, Distance/Diameter/Width measurement sensor test, keyboard test, display test, motor test (Please contact us if you have more questions on this topic)
5. What are common problem when using motorcycle adaptor?
The common problem with motorcycle/adaptor is the shaft strength. With heavy or big wheel, the thin shaft jumps during rotation, which cause a bad balancing result. (Please contact us if you have more questions on this topic)
