AV4-01
Quartz Flexure Accelerometer
Analog Output
Single
3mg
IP67
CE
Customized
Sponge+Box
25.4X30mm
Hebei
9031809090
Product Description
Flex Accelerometers for Navigation, Control and Measurement
AVIC produces the AV4 for industrial grade applications including: automotive test instrumentation, braking system deceleration, bridge and building sway and tilt monitoring, industrial and robotic control, land vehicle navigation, subway and high-speed train ride comfort control, and offshore drilling platform motion monitoring.
The integral electronics develops an acceleration-proportional output current providing both static and dynamic acceleration measurement. By use of customer supplied output load resistor, appropriately scaled for the acceleration range of the application, the output current can be converted into a voltage.
Features:
Low lag
High resolution
Widely temperature range
High accuracy
Low power
Excellent overload capacity
Small volume
Low cost
Broad measurement range
Applications
Drilling and Inclination Measurement
Aeronautics and Astronautics
Instruments and Equipment
AVIC produces the AV4 for industrial grade applications including: automotive test instrumentation, braking system deceleration, bridge and building sway and tilt monitoring, industrial and robotic control, land vehicle navigation, subway and high-speed train ride comfort control, and offshore drilling platform motion monitoring.
The integral electronics develops an acceleration-proportional output current providing both static and dynamic acceleration measurement. By use of customer supplied output load resistor, appropriately scaled for the acceleration range of the application, the output current can be converted into a voltage.
Features:
- Tactical navigation grade performance
- Analog output
Low lag
High resolution
Widely temperature range
High accuracy
Low power
Excellent overload capacity
Small volume
Low cost
Broad measurement range
Applications
Drilling and Inclination Measurement
Aeronautics and Astronautics
Instruments and Equipment
| S/No | Parameters | AV4-01 |
| 1 | Input range (g) | ±30 |
| 2 | Bias (mg) | <20 |
| 2.1 | One-month composite repeatability (µg) | <250 |
| 2.2 | Temperature sensitivity (µg/ºC) | <50 |
| 3 | Scale factor (mA/g) | 1.1~1.4 |
| 3.1 | One-month composite,repeatability (ppm) | <250 |
| 3.2 | Temperature sensitivity (ppm) | <200ppm |
| 4 | Axis misalignment (µrad) | <15000 |
| 5 | Vibration rectification (µg/g2rms) | <100(50-500Hz) |
| 6 | Intrinsic noise (µg-rms) | <3000(0-10000Hz) |
| 7 | Operating temperature range (ºC) | -55~180 |
| 8 | Shock (g) | 1000 0.5ms |
| 9 | Vibration peak sine (g) | 25@30-500Hz |
| 10 | Resolution /threshold (µg) | <10 |
| 11 | Bandwidth (Hz) | >300 |
| 12 | Quiescent current per supply (mA) | <12 |
| 13 | Quiescent power (mW)@ ±15VDC | <300 |
| 14 | Input voltage | ±13 to ±18 |
| 15 | Weight (grams) | 55 Nominal , 65 max |
| 16 | Diameter below mounting surface | Ф25mm |
| 17 | Height-bottom to mounting surface (inches) | 0.617 Max |
| 18 | Case material | 300 series stainless steel |
