Magnetostrictive Float type level measurement probe for underground oil tank
What are Automatic Tank Gauge used for?
Automatic tank gauge are used for monitoring fuel liquid level, volume and temperature inside fuel storage tanks. It is widely used at gas station and skid-mounted fueling site. It also can be used at chemical factory, pharmacy industry and waste water tanks.
SP300 Magnetostrictive probe is mainly composed of probe head, temperature sensors, protection steel pipe, magnetostrictive waveguide wire and floaters with magnet inside. Insert probe into underground tank, floaters float on the liquid surface, and slides up and down on rod according to the changes of liquid level. Processing measured data of product level, water level, density values (option), and average temperature of five-points, then transmit these data to smart console by digital communication port.
- ±0.5mm accuracy
- RS485 communication protocol
- 3-in-1 measurement, detect fuel height, fuel temperature and water height at the same time.
- 4 wires cable
- IP68 protection grade
- Intrinsically safe grade
- ATEX, EAC, CQST, SIL approved
- Length customized production
- Applied in Gasoline, Kerosene, Diesel, Ethanol gasoline, Methanol gasoline, Approved light oil
| Power supply | DC12V |
| Precision | ±0.5mm |
| Repeatability | ±0.1mm |
| Resolution of product level | 0.0069mm |
| Resolution of temperature | 0.0078ºC |
| Resolution of water level | 0.0069mm |
| Temperature range | -40 to 85ºC(-40 to 185ºF) |
| Points of temperature measured | 5 |
| Maximum communication distance | 1200m |
| Communication | RS485 |
| Intrinsic safety parameter | Power port: Ui = 15V DC, Ii= 400mA, Pi = 1.5W, Ci = 3.63μF, Li = 0mH; Signal port: Ui = 7.14V DC, Ii= 147mA, Pi = 260mW, Ci = 32.6μF, Li = 0mH; |
| Associated apparatus | WB-GSB03 safety barrier |
| Explosion proof grade | Ex ia IIA T4 Ga, II 1G Ex ia IIA T4 Ga |
| Protection grade | IP68 |
| Applicable medium | Gasoline, kerosene, diesel, Ethanol gasoline, Methanol gasoline, Approved light oil |
| Definition of wires | Blue Power + Brown RS485A White RS485B Black Power - |
| Communication address | 6 digits, see the"Manufacturing code"or S/N code on probe nameplate, this is also Probe ID in communication with console and FMS |
