Industrial UPS Inverter 

The Industrial UPS Inverter  from Communication Power Inverter NASN Factory is a new generation of intelligent MCU industrial Power Supply inverter and a standalone DC to AC inverter system for Telecom and industrial power applications. Developed and designed for the requirements of Telecom and Industrial, heavy duty application, which delivers continues true sine wave output power with high stability.Comprehensive solutions for servers, cloud computing, edge computing, 5G networks and communications infrastructure.Widely applied in communication Power systems, railway power systems, and other power systems to meet the high quality and high reliability requirements, and applicable to all the uninterrupted sine wave AC output systems that are sensitive to power interference and require reliable and clean.In addition, the inverter system offers new opportunities for energy savings by providing backup AC power.DC / AC inverters for telecommunication and communication equipment convert the DC batteries voltage to AC. NASN's Inverters are designed and built for reliability. These telecom-grade inverters provide pure ac sine-wave power for all critical network needs. we offer a wide range of inverters and converters in different capacities to integrate with DC Power Systems.

Features:

1.Optional three working modes: AC mains first, DC inverter first, Solar inverter first;
2.Automatic switching to AC input when DC input is 0V
3.Industrial inverters are highly reliable and not prone to failure.
4.The ability of an industrial frequency inverter to carry loads, especially shock loads,and to suppress high harmonic components in the waveform;
5.It can be applied in places where the load has high requirements for zero ground voltage.
6.Remote Power Management optional via RS-485 port;
7.Utility bypass function with fast load transfer switch;
8.Comprehensive circuit and load protections over-current, over- temp, overload, reverse polarity, over voltage, low voltage;
9.SPWM technology, pure sine wave AC output powers telecom equipment without performance degradation;
10.Form C alarm contacts for monitoring AC Fault and DC Abnormal conditions;
11.Optional three working modes: AC mains first, DC inverter first, pure DC inverter
12.Install: 19 or 23 inch rack or standalone
13.Low EMI and RFI interference characteristics
14.User-friendly Status and Diagnostic LCD/LED displays,easy to operate
15.Easy maintenance
Applications:
Applied to Inductive Load and Resistive Load
§Vehicle and shipboard equipment: Railway station, transportation equipment, etc.
§Industrial equipment: solar power, wind power, gas discharge lamps, etc.
§Office equipment: computer, printer, copy, scanner, etc.
§Kitchen appliances: microwave oven, induction cooker, rice cooker, etc.
§Household electrical equipment: electric fans, vacuum cleaners, lighting fixtures, etc.

Datasheet:More details: 

MODEL		TS220-XKX
Rated capacity(VA)		3K	5K	6K	8K	10K	12K	15K
DC input	Rated DC Voltage (Vdc)	220Vdc
	DC Output Range (Vdc)	220Vdc -18%~+25%
	Input refleoted noise	Input voltage and load current at rated value:<10%.
AC input	Rated input voltage (Vac)	220/230/240 Vac
	Input Voltage Range	145-286V AC
	Phase	single phase, three-line
	Input frequency range	50HZ±10%
AC output	Rated capacity (VA)	3K	5K	6K	8K	10K	12K	15K
	Rated output power (W)	2400	4000	4800	6400	8000	9600	12000
	Output voltage	220V±2%(210-240V adjustable)
	Output frequency precision (Hz)	50HZ±1% (Inverted output)
	Waveform	Pure sine wave
	Total harmonic distortion (THD)	<3% (linear load)
	Dynamic response time	≤30ms
	Power factor (PF)	0.8
	Conversion time	<10ms
	Efficiency	>88% (80% resistive load)
	Power transformer	Built-in		External transformer
	Protection	DC anti-reverse connection, over-under-voltage; utility input over-under-voltage; output overload, short-circuit; over-temperature and other protection
Working environment	Dielectric strength (input and output)	1500Vac, 1 minute
	Noise (1m)	≤50dB
	Operating environment temperature	-20ºC~+50ºC
	Humidity	0~95%, no moisture condensation
	Operating altitude (m)	≤1500
Interface And Communication	Human Machine Interface	LCD
	Communication interface	RS485
	Dry contact	Inverter state, bypass state, fault+AC abnormality, DC abnormality, device overload+backup
Mechanical size(mm)	Standard rack	4U
	(Depth * Width *Height)	509*469*178

Other Popular
 

Rack Mounted 220VDC Rectifier with Parallel Charging Converter

Switch Mode Power Supply 110VDC Rectifier System

Telecom DC-AC Inverters 48V DC

off Grid Inverter Telecom Rack-Mounted Telecom Inverters

Utility Power Inverter 110VDC to 220VDC Power Inverter

Industrial Rectifier Battery Charger

3.5′ ′ Screen 220VDC Rectifier System From Manufacturer

Telecommunications Battery Rectifier 24V Base Station DC Power Charger

FAQ

Q1: What kind of EV Charger do you have?AC and DC charger with connectors Type2, CCS1/CCS2, CHAdeMO, GB/T, etc.

Q2: Do you provide customized product?
We provide OEM and ODM services for clients.

Q3: What is the delivery time of EV charger?

About 4-6 weeks.
Q4: What about your warranty of EV Charger?
Generally 2 years. Our warranty period depends on customer's requirements and we always put customer's need as priority.

Q5:How do you package it ?
A:We pack in cartons.

Q6:what's the MOQ?
A:For LOGO, color or other special requirements, a minimum of 20 is required. If you do not have these requirements you can buy
directly, we will ship within 3-10 days.

Q7:Can you produce according to the samples?
A:Yes, we can produce by your samples or technical drawings. We can build the molds and fixtures.

Q8:Do you test all your goods before delivery?
A:Yes, we have 100% test before delivery.

Q9:What is your terms of delivery?
A:EXW, FOB, CFR, CIF, DDU.

Q10:What is your terms of payment?
A:We accept all methods of payment: paypal, T/T, credit card, West Union... Please contact us for more details.