SCR D 24/25
700W
24V 25A
110-250V
Lead-Acid Battery Charger
Electric Charger
Half-Bridge Charger
Grey
3kgs
Yes
as Per Requirement
TORCH
Cartons
20*15*10cm
China
8504409990
Product Description
Instruction
This charger adopts Iu-Ia charging curves with programmable intelligent control and high efficiency for charging. So the battery can reach an excellent state and prolong the battery life.
Charge Procedure
Step1 Charge with the maximum current , and go to next stage until reach the setted voltage value.
Step2 Charge with method of constant voltage. The current value will decreases, when the current is reduced to the setted current value .
Step 3 Charge with method of constant current until reach the next stage
Step 4 Charge with method of constant voltage. The current value will decreases, when the current is reduced to the setted current value .
Step 5 Charge with method of constant current until reach the end.
Low voltage protection: When battery voltage falls below the setted minimum, the charger refused to charge.
Overvoltage,overcurrent protection: When battery voltage, current is abnormal, the charger refused to charge.
Overheat protection: The overheating of the charger can lead the charger not to work.
Equalization Charging:The charger run to Equalization Charging automatically after 15 cycle charging .
Test before shipment
workshop show
- Working principle
This charger adopts Iu-Ia charging curves with programmable intelligent control and high efficiency for charging. So the battery can reach an excellent state and prolong the battery life.
Charge Procedure
Step1 Charge with the maximum current , and go to next stage until reach the setted voltage value.
Step2 Charge with method of constant voltage. The current value will decreases, when the current is reduced to the setted current value .
Step 3 Charge with method of constant current until reach the next stage
Step 4 Charge with method of constant voltage. The current value will decreases, when the current is reduced to the setted current value .
Step 5 Charge with method of constant current until reach the end.
- Features
Low voltage protection: When battery voltage falls below the setted minimum, the charger refused to charge.
Overvoltage,overcurrent protection: When battery voltage, current is abnormal, the charger refused to charge.
Overheat protection: The overheating of the charger can lead the charger not to work.
Equalization Charging:The charger run to Equalization Charging automatically after 15 cycle charging .
Test before shipment
workshop show
