Model NO.
JSX1029TL
Fuel
Diesel
Drive Wheel
4×2
Brand
Dongfeng
Models
Medium
Usage
Sealed, Compression Type
Condition
New
Steering
Power Steering, Recirculating Ball Steering Gear
Service Brake
Hydraulic Brake
Use
Dump, Sealed, Compression Type, Garbage Truck
Transport Package
Bulk Ship
Specification
5650× 2050× 2400
Trademark
JUSHIXIN
Origin
China
Production Capacity
200units/Month
Type:
Rear Loader
Certification:
ISO9000, CCC, CE
Volume:
3001-6000L
Emission Standard:
Euro 3
Transmission Type:
Manual
Payload:
4 Tons
New Garbage Truck Garbage Compactor Truck 8t 10tons Sanitation Compression Rubbish Collect Trucks Special Design
The garbage compression truck consists of a sealed garbage compartment, a hydraulic system and an operating system. The whole compressed car is fully sealed, and all sewage from the compression, dumping, and compression process enters the sewage tank, which completely solves the problem of secondary pollution during the transportation of the compression car. Imported parts are used as key components, which have pressure. The advantages of large size, good airtightness, convenient operation and safety.
| Cab | Flat top | Horsepower (PS) | 115PS |
| Dimensions (mm) | 5650×2050×2400 | Driving form | Steering wheel / right drive |
| Self weight (kg) | 4200 | Total weight (kg) | 8495 |
| Production cycle | 30 days | Warranty&certificate | Have |
| Item | Specification | ||
| Cab | Dongfeng Little Dorica D6 Cab | ||
| Front axle | 2.5 tons | ||
| Rear axle | 5 tons | ||
| Gearbox | 5-speed gearbox | ||
| Vehicle frame | Through reinforced girder | ||
| Tire | 7.50R16 type steel tire 6psc | ||
| ABS | Have | ||
| PTO interface | Have | ||
| PTO | Have | ||
| Front / rear overhang (mm) | front:1040,rear:1310 | ||
| Departure corner | front:20,rear:17 | ||
| suspension | Leaf spring 6/6 + 5 | ||
| Number of axles | 2 | ||
| Wheelbase (mm) | 3300 | ||
| Number of tires | 6 | ||
| Tread (mm) | 1485/1540 | ||
| Tire specifications | 7.00R16 | ||
| Drive type | 4*2 | ||
| engine | 4DX23-120 | ||
| Emission Standards | Euro 3 | ||
| brake | Drum | ||
| Braking System | Air brake | ||
The rear carriage is made high strength Q345 manganese stee, the thickness is 3mm for side panel and 4 mm for bottom. And the bottom of the garbage carriage is specially strengthened, which is not easy to be get collapsed, deformed and wearing, and it can extend the service life of the product. Also the slider of the pushing shovel is made of high quality MC nylon,which is self-lubricating and highly wear resistant.
The garbage carriage are of acid, alkali, corrosion resistance, since it will be treated with electrophoresis. And it can work at least 8 to 10 years not go rusting.
Pushing shovel with 3 section hydraulic cylinders is installed inside the tank, which can compress or push out the garbage already loaded. And its loading capacity is almost 2.5 times of those normal garbage trucks without compression mechanism .
Related Products
Send Message
