The compactor garbage truck is composed by sealed garbage van, hydraulic system, operating system. The vehicle is fully sealed type, compression and dumping by self. When it working, the sewage is all into the sewage box, so that thoroughly solved the problem of secondary pollution in the process of garbage transport, to avoid the inconvenience to people. The key parts adopt imported parts, it has great pressure, good sealing, convenient operation and safety etc. Rear hanging garbage barrel and overturned garbage bucket are optional.
Feture
1. Full hermetical and high strength bin box with good corrosion resistance and environmental protection;
2. Automatic loading garbage ,the doors open on both side of the bin box which makes it very convenient for garbage collection;
3. With dump function and hydraulic operation, very easy to dump the garbage;
4. Mainly used for cities, streets,schools and other garbage collection points, it is new sanitation truck which can avoid secondary pollution
The compressed waste truck usually called garbage compactor truck, compression garbage truck, waste compactor truck,compactor garbage truck,etc.
Technical parameters:
Specification:
Truck Specification | ||
Chassis model | HOWO | |
Cab | HOWO single row cab, with power steering. Electronic flameout,without a/c | |
Driving Type | 4*2 Left hand driving/right hand driving | |
Max Speed (km/h) | 99 | |
Overall dimension(mm) | 6140x2150x2400 | |
GVW( kg) | 7300 | |
Mass in working order ( kg) | 3670 | |
Tank Capacity (L) | 8000 | |
Wheelbase(mm) | 3360 | |
F/R track base (mm) | 1900/1800 | |
F/R overhang (mm) | 1205/2905 | |
Approach/Departure Angel | 25/14 | |
Tire | 7.00R16 (6+1) | |
Clutch | Single-plate dry diaphragm spring clutch | |
Steering | Hydraulic steering with power assistance | |
Gear box | 5-speed | |
Bridge | Front axle | 2T |
Rear axle | 4T | |
Enging | Model | ZZ1041 |
Fuel Type | Diesel fuel | |
Type | Water-cooled four-stroke,, direct injection, turbocharged | |
Exhaust(ml) | 2771 | |
Braking system | Service Brake | Compressed air brake |
Park Brake | Spring energy | |
Auxiliary brake | engine exhaust brake | |
Eletric system | 24v | |
Refuse compactor structure parameters | |
Equipment | |
Structure | Body, sub frame, lifting rear part, the loading device, the pushing-out plate, hydraulic and electric systems |
Loading capacity | 4.5m3 |
System of loading | Mechanized, rear loading |
Modes of the pressing | Manual,semi-automatic,automatic,lifting rear part operation manual,loading,pushing,pressing, pushing out automatic |
Body | |
Version | All-metal |
Shape | arc-shaped |
Sidewalls | Sheet carbon steel (thickness: 3 mm) |
Bottom | Sheet carbon steel (thickness: 4 mm) |
Roof | Sheet carbon steel (thickness: 4 mm) |
Front frame | Sheet carbonaceous steel (thickness: 5 mm) |
Rear frame | n-shaped profile from sheet carbon steel (thickness:5 mm) |
Basis | 120X120mm (thickness: 5 mm) |
Loading bunker | |
Loading bunker | All-metal with sidewalls and a loading ladle |
Volume | 0.7 m3 |
Sidewalls | Sheet carbon steel (thickness: 3 mm) |
Ladle floor material | Sheet carbon steel (thickness: 4 mm) |
Liquid drain | Drainage channel,sewage tank |
Working zone Lighting | 2 lamps |
Mechanism of raising | Two hydraulic cylinders |
Ensuring tightness | Between the body and lifting back part in the lower part profile acid-proof rubber is used. |
Pressing system | |
Features | Control mode diversification,bidirectional compression |
Pressure | 16Mpa |
Compaction ratio | 4.0:1 |
pressing mechanism | The giving plate and hinge related pressing plate moving on two directing bars |
Pressing mode | Automatic pressing (1 full cycle and continuous pressing) and controlling of each cycle of pressing separately |
Control of pressing | Control from the external panel on the bunker |
Lifting rear part | |
Mechanism of lifting | Two hydraulic cylinders |
Function description | Suitable for various rubbish bins |
Others | |
Color and Logo | Optional |
The compactor garbage trucks usually compacts the waste using a hydraulically powered mechanism that employs a moving plate or shovel to scoop the waste out from the loading hopper and compress it against a moving wall. In most compactor designs, the plate has a pointed edge (hence giving it the industry standard name packer blade) which is designed to apply point pressure to the waste to break down bulky items in the hopper before being drawn into the main body of the truck.
The garbage compactor truck we maufacture is an ideal compactor for large clean up operations. It is simple to operate and highly effective with excellent compaction ratio. It is ideally suited to municipal applications where large amounts of mixed industrial and domestic refuse is to be collected
Our garbage compactor truck for sale is consisted of four main parts, sealed garbage compartment, hydraulic system, operating system and lifting cylinder.fully sealed. It can compact and dump the garbage automatically. The sewage will flow in the compartment completely to avoid re-pollute during transportation.
As a professional special vehicle manufacturer in China, the garbage compression truck we produce is from 4cbm to 18cbm
Contact us:
Sales Manager:Jenny Liu
Mobile +86 15171497032
