The garbage compactor truck usually compacts the waste using a hydraulically powered mechanism that employs a moving plate or
shovel to scoop the waste out from the loading hopper and compress it against a moving wall. In most compactor designs, the plate
has a pointed edge (hence giving it the industry standard name packer blade) which is designed to apply point pressure to the
waste to break down bulky items in the hopper before being drawn into the main body of the truck.
1suzu 4X2 6 Cubic Meters Garbage Compactor Trucks | ||
Chassis | ||
Chassis model number | ISU-ZU 100P chassis(QL10703HARY) | |
Cabin | Brand: ISU-ZU | |
| 100P single cabin, 4x2 left hand drive | |
| 2 seats, with air conditioner, USB connector radio | |
Vehicle Main Dimensions | Overall dimensions (L x W x H) mm: 6190*1880*2320 mm | |
| Wheel base: 3360 (mm) | |
| Overhang (front/rear): 1015/1525 (mm) | |
| Approach angle: 24° | |
| Departure angle: 16° | |
Weight in KGS | Curb Weight:4210 kg | |
| Payload: 4-6tons | |
Max. driving speed(km/h) | 90 | |
Engine | Brand | ISU-ZU |
| Model | 4JB1CN, EURO IV |
| Emission | 2771 ml |
| Type | 4-stroke direct injection , 4-cylinder in-line with water cooling, turbo-charging and inter-cooling |
| Horse Power(HP) | 98HP |
Gearbox | ISU-ZU MSB, 5 Forwards gear & 1 reverse gear | |
Tire | 7.00-16, 6 pcs+1 spare tire | |
Axle | Front axles 2~2.5t, rear axle 3~4.8t | |
Garbage box parameters | ||
Volume | 4.5 m3 | |
Material | Carbon steel and high tensile steel | |
Standard equipment | 1. Dustbin volume: 4.5m³ 2. hydraulic control device | |
