Foton/Jingling-E7 Electric Van/Car with Lithium-Battery for Transportation Goods/Cargo on-Sale, Battery Van, Electric Van

1.Balance safety and usability.

2.Optional for long and short endurance battery, equipped with CATL battery pack.

3.Strong usability, high interior convenience.

1.Unlike the traditional VAN, the Genie E7 has a real "engine" compartment, but the front is equipped with a motor and electronic control system, which is a front-wheel drive model. At the same time, the entire front of the car looks more slender, which can not only ensure a certain volume of collision safety collapse zone, but also the more inclined windshield design can also optimize the wind resistance performance of the whole vehicle when driving at medium and high speeds.In terms of body technology, the Elf E7 uses a large number of aluminum alloy materials, under the premise of meeting the strength, compared with the VAN models of the same size on the market, its own weight performance is lighter, which can reach about 140kg, which undoubtedly improves its compliant loading capacity for VAN models with a load mass of about 1 ton.

2.In the cargo area, the design of the Genie E7 is very user-friendly, the tailgate adopts a double bipartite door design, even if there is an obstacle behind the tail, it will not be as difficult to open the rear tailgate as traditional VAN models. And the tailgate is a 4:6 opening door design, in a part of a more narrow area, only one side of the small door can be opened to achieve loading and unloading, the practicality is very high, and the tailgate also supports 90 °, 180 °, 270 ° and other opening methods.Both the side and rear tailgates can be opened from the inside, so there is no need to worry about being locked inside the cargo compartment during loading and not being able to get out.
3.The Genie E7 integrates the electronic control system and motor system in the front area, and places the battery pack in the chassis area in the middle of the cargo compartment;The chassis area is not our usual girder, but uses an alloy frame to fix the body chassis, and is equipped with a front independent suspension rear steel plate suspension design.In terms of motors, the Genie E7 uses its own permanent magnet synchronous motor of Beiqi Foton FTTBP070A,In terms of battery packs, the Genie E7 can choose two versions of the 38.64kwh lithium iron phosphate battery pack of the Ningde era or the 46.36kwh lithium iron phosphate battery pack of the Ningde era.

How to load the cars into the vessel?

1.Before loading, all vehicles shall be parked in the unified area of the loading dock, and then the dock workers, that is, the drivers of the dock, shall drive onto the ship one by one. Each vehicle enters from the hatch at the stern of the ship and parks in the designated area according to the stowage plan prepared in advance by the captain.

2.In order to make full use of the cabin capacity, the distance between cars is very close. After the vehicle is parked, a lasher is required to bind and reinforce each vehicle, that is, use the lashing belt to fix the hull through the hollowed out lashing holes on the deck.