2:Pollution-free - (Equipped with thermal mutual resistance warm water cooler to cool and collect heat and carbon ash)
3:Short time - (directly heating from the core during regeneration, without heating through the heat insulation layer from outside to inside, the total time is shortened from 5-10 hours to 40 minutes, automatically open the cooling mode after regeneration, the cooling time is shortened from 2 hours to 5 minutes)
4:Full - (The device has the back pressure detection function, equipped with a data printer, which can detect the back pressure of the exhaust pipe before and after regeneration. After the detection, the back pressure data is automatically printed, and the real-time back pressure can be seen during the whole regeneration process. Automatically print temperature and time data after regeneration to generate detection report)
5:Good effect - (the regeneration process automatically opens the high temperature and high pressure purge mode, the carbon accumulation does not remain, after the end of high temperature regeneration through the explosion blowing mode completely carbon accumulation out!)
1:The control system adopts programmable intelligent PLC control, multi-stage temperature control, it has automatic temperature rise and drop program, PID function, high temperature control precision.
2:Real-time pressure data, equipped with data printing function.
3:The high temperature head is made of imported high temperature movement, and the internal parts are made of high quality mica resistant to 1300 degrees. It has the advantages of energy saving and high temperature without deformation. It is more convenient to connect with DPF by fast joint.
4:Heating effect is 50% energy saving than heating tube, DPF regeneration time is reduced to 30 minutes!
5:0 to 600 degrees in 4 minutes!
6:Cooling time drops from 600 degrees to 50 degrees in 3 minutes! Adjustable blasting and blowing function can completely remove the residual carbon ash!
operating temperature; 0-800 degrees
Total power: 20KW
Total size of equipment :3200*800*1420(mm)
Maximum wind pressure: 23KPa
Pressure of gas storage tank: 1.0mpa (10kg)
Host size :1600*800*1420(mm)
Mobile table size :860*600*380(mm)
Thermal mutual resistance warm water cooler :830*600*800(mm)
Power: 0.6KW Water storage: 40L
Product use
Nanyang NanTai Experimental Equipment Co.,Ltd is a joint-stock enterprise that produces common rail test bench, traditional dieselfuel injection pump test bench, Nozzle Tester, and sells spares parts for repairing variety of electronic diesel injection systems
to serve the automobile aftermarket all over the world.
The company pursues high standard manufacturing and qualified products. All the products have passed the quality system
certification of ISO9001:2008 & CE certificate and entered European market. Depending on the stable and lasting capabilities, our
products are well known to international market such as Russia, Mongolia, Bulgaria ,Albania, Argentina, South Africa, Germany,
Romania, Ukraine, Haiti, Iraq, Britain, Brazil, Malaysia and etc
Q: Are you trading company or manufacturer ?
A: We are test bench assembling factory. We have had test bench for 20 years.
Q: How long is your delivery time?
A: Generally it is 5-10 days if the goods are in stock. or it is 15-20 days if the goods are not in stock, it is according to
quantity.
Q: What is your terms of payment ?
A: Payment<=1000USD, 100% in advance. Payment>=1000USD, 30% T/T in advance ,balance before shippment.
Q: How about the use of maintenance technology and equipment ?
A:We have free training about test bench,injector and pump maintenance.
Q: Why should I choose your product?
A: We can provide you the best quality and the most competitive price ,and we have our own engineer, if you have any requirements
you can contact us directly.
