Paintless Dent Repair Tools Pdr Tools Kit LED Line Board Car Ding Dent Repair Rod Hooks, 8PCS Rod Kit, Dent Repair Hooks Rods

Paintless Dent Repair Tools Pdr Tools Kit Led Line Board  Car Ding Dent Repair Rod Hooks
Item No.:BT-223142
Include:
3PC Hook Kit                                                                                 
1PC  Led Line board                                                                   
1set Tap down pen with 9pc tips                                            
1pc 25mm Hammer                                                  
1pc Chain                                                                              
3pc S hook                                                                              
3pc  O  ring                                                                         
1pc Hook part

Package:
1.carton box
2. According to your request
 

Principle: With the help of lever principle, through the traction gasket outward traction to repair the car surface depression.

Function: For the dent on the surface of the car, under the premise of no damage to the original car paint, repair.

Advantages:

1. The operation is very simple, basically everyone can operate. Save time, labor, the key is to save money.

2. It will not cause damage to the car paint and body.

Note:

1. Please do not touch the glue gun and melted hot melt glue, so as to avoid burns.

2. If the car paint in the depression is chapped or falling off, please do not use this tool to repair it.

3. Paintless Dent Repair Tools can only repair non-destructive dents on the paint surface of the car, and the dents should preferably be located near the flat surface. For depressions located on the car ribs (or narrow raised lines), it is difficult to repair them using this method; For dents with damaged car paint, this repair method is not suitable and should be repaired at a car repair shop.
 

1. First detect the deformation using a light reflector. This process will help you identify the metal orientation correctly and promote the repair.

2. Then, using a metal rod, it is recommended to select a tip shape suitable for most people and move the dent from the inside or under the panel. Hooks of different shapes and lengths can be selected according to the depth of different dents to complete the repair work.