Newest ATF-63A1 oil automatic transmission fluid changer
Model:ATF-63A1
| Model | ATF-63A1 |
| Power Supply | DC12V |
| Maximum Power | 150W |
| Pressure Gauge | 0-1.5Mpa |
| Filter Precision | 5μm |
| Equivalent Exchange Error | ±20ml |
| New/Used Fluid Tank | 15L*2 |
| Fluid Hose | 2.4m |
| Working Temperature | -10ºC~40ºC |
| Relative Humidity | <85% |
| Noise | <70db |
| Weight | 31kg |
| Size | 44*48*90cm |
| Automatic gearbox cleaning fluid exchanging machine, adopts electronic weighing measurement, with zero-pressure rapid identification, microcomputer control for accurate and equal volume, and internal module design, extremely low failure rate, automatic completion of manually changing the direction of oil in and out of gearbox in a short time, is a powerful equipment for deepening maintenance operations. |
| 1.Fully automatic identification of oil inlet and outlet direction/intelligent conversion of automatic transmission inlet and outlet direction. 2. Automatically complete the new and old oil replacement function of the transmission. 3. Full-automatic intelligent electronic control high-precision equal exchange of old and new oil 4. Automatically identify positive and negative poles of power supply. 5. Automatic transmission cycle cleaning function. 6. Intelligent vehicle model database system guide oil change system. 7. Touch screen control, intelligent operation guidance(oil product model, disassembly position, oil change quantity, oil quantity inspection position). 8. Optional temperature display and heating function (additional charge). 9. A variety of professional connectors, suitable for each car system (additional charge). 10. The system has a variety of car wave box data. |
| 1,During the operation of the equipment, it is strictly prohibited to add automatic transmission oil from the refueling port 2. When the equipment is stored, oil is strictly prohibited in the old and new fuel tanks of the equipment. The old oil should be discharged to other containers immediately after the completion of the equipment work to ensure the accuracy of the equipment exchange 3. When the device is running, it should be placed in a horizontal position 4. During the operation of the equipment, except in emergency situations, the engine should be avoided to turn off and start again, so as to prevent excessive voltage fluctuation when the engine is started, which will affect the equivalent exchange accuracy 5. Personnel should monitor the replacement of the equipment during operation 6. After each use, remove the dust on the equipment and the oil pollution on the pipeline in time 7. Store in a cool, ventilated place 8. Periodically check whether the pipe seals of the ports are good 9. Please keep the oil filter of this equipment clean. It can not be cleaned and recycled |
Yantai Lift Equipment Co., Ltd. is a joint-stock enterprise specializing in the production and sales of wheel alignment, car lift, tire changer, wheel balancer and other garage equipment.
The company has four major production bases: Wheel alignment, car lift, tire changer and wheel balancer. The company always adheres to independent research and development and independent production. Advanced intelligent equipment and scientific management mode provide its excellent quality assure.
Wheel alignments include car wheel alignments, truck wheel alignments, and car lifts include scissor car lifts, single-post car lifts, two-post car lifts, four-post car lifts, and motorcycle lifts.
Our products have been exported to Australia, Thailand, Malaysia, Indonesia, France, Spain, Turkey, Jordan, Mexico and other countries.
Our products: The perfect combination of high quality and high cost performance.
Our mission: High-quality products serve the automotive aftermarket in China and the world.
We are becoming a modern and competitive company, a leader in the field of automotive service equipment.
Trade Terms | FOB / CFR |
MOQ | 3UNITS (USD200.00 extrally charged for LCL shipment to cover the inland freight + custom declaration fee) |
Port | QINGDAO |
Shipment | BY SEA /AIR |
Payment Terms | T/T |
Payment condition | 30% prepayment,balanced before shipment. |
Supply Capability | 1000units/month |
Sample Availability | Yes ,But all freight(Inland freight +seafreight) covered by buyer |
Sample Time | 5-10days(depends on whether have in stock) |
Lead Time | 25-30days(Rush season 5-10days longer) |
Packing | Metal frame&Carton |
Delivery time | 30-45days shipping time (depends on destination position) |
Service | 1% free parts;1year warranty after port of destination |
1.What's your advantage?
A: Honest business with competitive price and professional service on export process.
2. How I believe you?
A : We consider honest as the life of our company, we can tell you the contact information of our some other clients for you to check our credit. Besides, there is trade assurance from Alibaba, your order and money will be well guaranteed.
3.Can you give warranty of your products?
A: Yes, we extend a 100% satisfaction guarantee on all items. Please feel free to feedback immediately if you are not pleased with our quality or service.
4.Where are you? Can I visit you?
A: Sure,welcome to you visit our factory at any time.
5.How about the delivery time?
A: Within 15-35 days after we confirm you requirement.
6.what kind of payment does your company support?
A: T/T, 100% L/C at sight, Cash, Western Union are all accepted if you have other payment,please contact me
