Bus wash equipment with 3 roll over brushes (CB-730) has two lateral brushes and one overhead brush. It is most often used for washing buses and trucks where the length does not exceed 18000mm, the height does not exceed 4200mm, and the width is 2700mm. During the washing process, the bus remains motionless, and the bus wash machine will move the brushes around the vehicle. Shown below is some basic information.
Product specifications:
| Model | CB-730 |
| Dimension | L*W*H: 2880mm×5120mm×5900mm |
| Assembling Range | L≤24000mm×W 6800mm (necessary inspection channels are designed on two sides) |
| Moving Range | L 1800-2400mm × W 6800mm |
| Voltage | AC three-phase four-wire system voltage AC380V50Hz |
| Water Supply | DN25mm water flow rate≥120L/min |
| Ground Flatness | Deviation≤10mm |
| Washing method | 1 rollover |
| Applicable Vehicles | Container truck, box truck, bus |
| Applicable Car Dimension | L≤18000mm×W 2700mm×H≤4200mm |
| Washing Time | 12-15 cars/h |
Advantages
- Rollover washing ensures a better cleaning performance.
- A fully automatic PLC electronic control system improves the security.
- The high-pressure water spray system increases the washing speed.
- The galvanized frame is extremely corrosion resistant.
Configurations
| Standard Devices |
| Lateral brush motor |
| Overhead brush motor |
| Water pump |
| Drive motor |
| Equipment data intellectualization |
| Self-diagnose system |
Detail shows:
Our company:
Qingdao Risense Mechatronics is a car wash equipment manufacturer with almost a decade of design and production experience.Our customers are primarily made up of car wash service providers and we supply them with equipment like our car wash tunnel systems, rollover car wash systems, touchless car wash systems, soft-touch carwash systems, and high pressure wash systems. Based on time tested technology from Japan and combined with the latest innovations in Europe and America, Risense offers complete and unique car washing systems.
This dedication to quality continues throughout the manufacturing process. We use a mature and stable numerical control processing technology to process all components, frames, motors, and the non-standard parts used in our car wash equipment.
Factory Tour:
The Risense factory includes 6 separate manufacturing workshops spanning a total area of 40,000 square meters. We utilize highly advanced and stable numerical control process technology to process and assemble all components, frames, motors, and non-standard parts for our car wash equipment.
Frame manufacturing workshop
The frame of the car wash machine is made of high-quality steel plates. The frame is galvanized, and its corrosion resistance is 10-20 times higher than hot galvanized plates, effectively extending the service life of the car wash equipment
Exhibitions:
As a car wash system manufacturer, we have nearly 10 years of production experience. To date, our vehicle cleaning systems have been sold in more than 100 countries including Russia, the United States, Canada, Singapore, Saudi Arabia, Pakistan, and Spain. If you are in search of a new vehicle cleaning system or are looking for an agency opportunity, you are welcome to contact us.
Our certificates:
Our company has obtained ISO9001 Quality System Certification, Europe CE Quality Certification and ISO 14001 Environment Certification. We conduct production and quality inspections in strict accordance with the standards set by these governing bodies and some of our own additional standards. We put forth great effort to meet all of the requirements of our customers.
Other Products:
Risense is the professional manufacturer of car wash machine for more than 20 years. The following products are our main products:
1. Touchless car wash machine
2. Rollover car wash machine
3. Tunnel car wash machine
4. Bus truck wash machine
5. self-service car wash machine
Packing & Delivery:
FAQ:
Q: Will we provide pre-sale services ?
A: Free product consultation is available and custom car wash solutions will be provided according to your preferences car wash machine type, daily passenger flow, venue size, etc.
Q: what is your cooperation modes?
A: There are two cooperation modes with Risense: agency and distribution. You can become an agent by purchasing more than 10 vehicle wash machines every year and as one of our distributors, you can enjoy a more favorable price.
Q: Do you provide construction drawings design?
A: Our engineers will provide customers with a car washing plant design and construction drawings on the basis of your location, environment and purchased equipment model.
Q: How about installation?
A: Our after-sales installation engineers will go to the site and offer customers free installation, testing, operational training and maintenance training.
Q: What after-sales service do you provide?
A: 1) Installation support. We can assign engineers to visit the site for installation.
2) English manuals and other documents are available for delivery.
3) Lifelong technical support; maintenance service for the complete service life.
4) Warranty: one year for the whole machine.
Contacts:
Mobile: 0086-15964972931
Welcome to contact us at any time We will reply you within 24 hours
