Model NO.
GR-2000
After-sales Service
Worldwide
Warranty
One Year International Warranty
Model
GR-2000
External Dimension (mm)
460*710*1000
Output Flow
2000 ml/min
Input Power
220V 50Hz
Power Consumption
1100W
Delivery Pressure
0.2MPa
Operation Time
20min, 40min, customize
Max. Water Consumption
90ml/h
Capacity of Internal Water Tank
25 L
Water Quality Requirement
pure water
Ambient Temperature
0~40 degrees Centigrade
Weight
less than 50kg
Continuous Operation Time
more than 8 hours
Trademark
Green
Transport Package
Wooden Case
Specification
460*710*1000mm
Origin
Jinan, China
HS Code
854330009
Remove Carbon Deposit Potential Fuel Saving
Lower Emission Minimize Vibration
Prolong Engine Life Chemical Free, Only Pure Water
Restore Horse Power Safe & Easy Operation
Reason of Carbon Deposit Formation
When engine is working, the fuel oil and little amount of incoming lubricant couldn't combust completely. The unburned oil is converted into colloid adhering to intake valve, intake pipes, piston or surface of the combustion chamber due to high temperature and oxidation. And after more high temperature, the colloid will be solidified into mixture of asphaltene and oil coke, that's how carbon deposit formed.
Formula of oil and gas burning in combustion chamber:
C8H18+O2→CO+H2O -- (incomplete combustion)
→CO2+H2O - (complete combustion)
The carbon deposit is formed at spark plug, cover and cylinder head due to incomplete combustion.
Chemical equation:
C8H18+heat→C+H2+CxHy - (carbon deposit)
Hazard of Carbon Deposit
Carbon deposit causes abnormal emission, increase of fuel consumption, idle jitter, lowering power, easy engine stops and difficult engine starts, furthermore, the lifespan of TWC, oxidation sensor and spark plug will be shortened. If severe carbon deposit occurs, it may cause the intake valve burnt or adhered, preignition, deflagration, engine knock, cylinder scoring to damage the engine cylinder.
Working Principle
Under the ambient temperature and atmospheric pressure, the hydrogen is conveyed directly into the combustion chamber of the operational engine, in which, the hydrogen is converted into hydrogen ions burning with the carbon deposit and oil sludge to generate carbon dioxide and water, so as to remove the carbon deposit effectively and clean the engine as well. Below is the chemical equation in the combustion chamber:
The hydrogen is converted into hydrogen ions in a certain condition H2→2H+
The high activated hydrogen ions combined with carbon deposit and oil sludge in the combustion chamber are converted into carbon dioxide and water which is discharged with the car exhaust:
C+H+→CxHy
CxHy+O2→CO2+H2O
Features
The advanced "PEM" technology is applied to this machine which electrolyzes pure water to generate 99.99% purity hydrogen, and controlled by microcomputer, neither backfire nor explosion is occurred. This safe and reliable machine is the best one for cleaning car engine.
Key Features
- Microcomputer control system that enables automatic operation;
- Intellectual control to detect the engine stop
Easy and Safe Operation
- Controlled by microcomputer and automatic operation that is reliable, stable and safe;
- Without any catalyst, only pure water (>2MΩ deionized water or secondary distilled water ) is needed to generate gas under atmospheric pressure;
- Directly connect to the intake manifold of the engine without dismantling the engine,;
- Unnecessary to replace the grease or grease seal, and zero cost of replacing consumables or dismantling parts.
- Safe and efficient maintenance, only need to change drying agent which can be recycled
Timesaving
The operation time is varied depending on different car engine:
- 40 minutes for >2000cc;
- 20 minutes for ≤2000cc
Economy
Only fill with pure water (>2MΩ deionized water or secondary distilled water ).
Little water consumption
Little power consumption
Effective
After using our machine to clear the carbon deposit and oil dirt in the car engine, the horsepower will be increased and the oil consumption will be reduced. It brings you a comfortable driving experience.
Green and Environmental Protection
- After cleaning carbon deposit in the engine, the waste gas emission and the environmental pollution is reduced.
- No reagent is needed and no pollution to the environment. Protect the operator's health.
Technical Parameters
| Model | GR-1000 | GR-2000 | GR-3000 | GR-5000 | |
| External Dimension (mm) | 460*710*1000 | 550*710*1000 | |||
| Output Flow | 1000 ml/min | 2000 ml/min | 3000 ml/min | 5000 ml/min | |
| Input Power | 220V±10% 50~60HZ | ||||
| Power Consumption | ≤500W | ≤1100W | ≤1300W | ≤2000W | |
| Delivery Pressure | 0.2MPa | ||||
| Operation Time | <=2000cc | 20min | 20min | 20min | / |
| >2000cc | / | 40min | 40min | 20min | |
| Max. Water Consumption | 50ml/h | 90ml/h | 150ml/h | 240ml/h | |
| Capacity of Internal Water Tank | 25 L | ||||
| Water Quality Requirement | pure water (>2MΩ deionized water or secondary distilled water ) | ||||
| Ambient Temperature | 0~40ºC | ||||
| Weight | ≤40kg | ≤50kg | ≤58kg | ≤68kg | |
| Continuous Operation Time | ≥8 hours | ||||
Remark: The cleaning time could be set within the range 0 ~ 99 minutes according to engine size, driving kilometers, thickness of oil sludge, carbon deposit, rust and impurities.
Jinan Green Lab Instrument Co., Ltd.
Add: No.554 Zhengfeng Road, High-tech Zone, Jinan, China
