Model NO.
DK30
Deceleration Device
With Deceleration Device
Elevator Door
Center Opening Door
Door Knife
Single
Attendant
Without Attendant
Control System
Monarch
Traction Machine
Mona
Door Operation System
Ouling
Cop
Monarch
Safety Gear
Aodepu
Governor
Aodepu
Ceiling
Several Models to Be Selected
Car Wall
Hairline Stainless Steel
Car Door
Hairline Stainless Steel
Car Bottom
PVC, Models to Be Selected as You Like From Our Ca
Trademark
DONGAO, DAS
Origin
Jiangsu, China
HS Code
8428101090
Apart from the effective and intellectual control system,the small machine room elevator also applies small traction machine and thin control cabinet design,which make the machine room smaller and the layout more compact. The new generation small machine room elevator truly fulfill the company's energy-saving concept.
It greatly saves the space
Machine room is only an extension of the well.It is convenient in construction and low in cost.The application of compact gearless traction machine leaves a larger space for machine room
.
Passenger elevator(Machine roomless)
The company machine roomless passenger elevator, with an environment concern, saves energy and reduces the consumption, save the construction area and increases the freeness of designers, thereby fully reflect the idea of environ ment friendly culture. Compared with the gearwheel elevators with the same load capacity, machine roomless elevators save 25% electricity and 10% of construc tion are. The company has broken through the prerequiste that machine rooms must be available for elevator, providing limitless possibilities of creation for the limited space of modern construction
1. Raw Material
2. Producing management
Production department will make the production according to enginner's instrution.
There is a agenda in each workshop showing the production plan everyday.By this way, The workers are
all clearly know which project is producing now.Then check the machines status before operation.
3. Packing
4. Quality Control
5. After Sales Service
1) Entrust maintenance to local agent.
2) Arranged by customer.
3) If necessary, we provide training for customer.
Main function1. Raw Material
We stictly check and contol the quality of raw materials.
QC department will check all the materials,when raw material comes to factory, we refused any cuounterfeit products. Only qualified material will get into raw material warehouse.
QC department will check all the materials,when raw material comes to factory, we refused any cuounterfeit products. Only qualified material will get into raw material warehouse.
2. Producing management
Production department will make the production according to enginner's instrution.
There is a agenda in each workshop showing the production plan everyday.By this way, The workers are
all clearly know which project is producing now.Then check the machines status before operation.
3. Packing
We apply solid plywood which can stand long time sea shipping. For some important parts ,like control cabinet,
door operator and motor, parts will be covered by a strong film first, with desiccant, before put into boxes.
door operator and motor, parts will be covered by a strong film first, with desiccant, before put into boxes.
4. Quality Control
1) All raw materials will be checked before get into warehouse. And bulk electronic product do sampling inspection. All parts must have qualified certificate from suppliers. QC1 is responsible for this.
2) During production stage, QC2 will check commissioning for each elevator, escalator and moving walks.
3) After elevator and escalator finished, QC3 will test the match of elevator motor and control cabinet, and the running condition of escalator and moving walks.
4) After packed, QC4 will check package condition for each parts, and takes photo for further reference.
5) When delivery, QC5 will check if all parts packed in container to avoid any missing, and take photos for further reference.
2) During production stage, QC2 will check commissioning for each elevator, escalator and moving walks.
3) After elevator and escalator finished, QC3 will test the match of elevator motor and control cabinet, and the running condition of escalator and moving walks.
4) After packed, QC4 will check package condition for each parts, and takes photo for further reference.
5) When delivery, QC5 will check if all parts packed in container to avoid any missing, and take photos for further reference.
5. After Sales Service
1) Entrust maintenance to local agent.
2) Arranged by customer.
3) If necessary, we provide training for customer.
| Standard function | ||||
| 1 | Inspection operation | 29 | Over speed protection | |
| 2 | Slow speed running | 30 | Contact protection for brake switches | |
| 3 | Automatic door opening time adjustment | 31 | Interphone communication | |
| 4 | Full load bypass | 32 | Wheeling protection | |
| 5 | Automatic turn off lighting and fun | 33 | Alarm bell | |
| 6 | Automatic return to home landing | 34 | Emergency lighting | |
| 7 | Door re-closing | 35 | Level switch protection | |
| 8 | Error recording | 36 | False call canceling | |
| 9 | Hoist way self learning | 37 | Automatic reversal call canceling | |
| 10 | Automatic door opening | 38 | Floor display directional setup | |
| 11 | Attendant service | 39 | Isolate running | |
| 12 | Bypass operation | 40 | Dot matrix floor indicator | |
| 13 | Automatic correction of floor position signal | 41 | Rolling display of running direction | |
| 14 | Lift locking | 42 | CAN communication protection | |
| 15 | Protection of door lock up outside dooor area | 43 | Arrival gong | |
| 16 | Infrared light curtain protection | 44 | Emergency return in case of fire | |
| 17 | Over load protection | 45 | Main control protection | |
| 18 | Reversal runing protection | 46 | Main control CPU WDT protection | |
| 19 | Anti-skip protection | 47 | Discretional setup of service floor | |
| 20 | Anti terminal switches protection | 48 | Test running | |
| 21 | Anti-terminal over running protection | 49 | Clock control | |
| 22 | Phrase protection | 50 | Direct landing | |
| 23 | Contactor protection | 51 | Load weighting device | |
| 24 | Failure analysis of shaft self learn | 52 | Full collective control | |
| 25 | Motor temperature protection | 53 | Door opening button (external) | |
| 26 | Door opening failure protection | 54 | Door opening button (internal) | |
| 27 | Protection for door lock short circuit | 55 | Fire running function | |
| 28 | Door lock failure for brake switches | |||
| Optional function | ||||
| 1 | Open the door in advance | 10 | Remote control | |
| 2 | Direct parking | 11 | Camera function in the car | |
| 3 | Group control | 12 | Voice announcer | |
| 4 | Duplex control | 13 | Car assistant operation box | |
| 5 | On-duty peak service | 14 | Operation box for the handicapped | |
| 6 | Off-duty peak service | 15 | Intelligent calling service | |
| 7 | Door open time extending | 16 | IC card control function | |
| 8 | Car arrival gong | 17 | Leveling when power failure | |
| 9 | Remote monitor | |||
| Small machine room passenger lift specifications | |||||||||
| No. of persons | Rated capacity (kg) | Rated speed (m/s) | Car net size | Door net size(DW*DH)mm | Shaft inside dimension | Machine room size | Max traveling height(m) | ||
| W*D(mm) | 2P center opening | W*D(mm) | Pit depth | OH | W*D*H(mm) | ||||
| 6 | 450 | 1.0 | 1200*1000 | 700*2100 | 1750*1620 | 1500 | 4400 | 1750*1620*2500 | 45 |
| 8 | 630 | 1.0 | 1400*1100 | 800*2100 | 2000*1720 | 1500 | 4400 | 2000*1720*2500 | 45 |
| 1.6/1.75 | 1600 | 4500 | 96 | ||||||
| 10 | 800 | 1.0 | 1400*1350 | 800*2100 | 2000*2000 | 1500 | 4400 | 2000*2000*2500 | 45 |
| 1.6/1.75 | 1600 | 4500 | 96 | ||||||
| 2.0 | 1800 | 4900 | 120 | ||||||
| 2.5 | 2000 | 5100 | 150 | ||||||
| 13 | 1000 | 1.0 | 1600*1500 | 900*2100 | 2200*2150 | 1500 | 4400 | 2200*2150*2500 | 45 |
| 1.6/1.75 | 1600 | 4500 | 96 | ||||||
| 2.0 | 1800 | 4900 | 120 | ||||||
| 2.5 | 2000 | 5100 | 150 | ||||||
| 3.0 | 2600 | 5600 | 150 | ||||||
| 3.5 | 3100 | 5950 | 180 | ||||||
| 4.0 | 3850 | 6350 | 180 | ||||||
| 15 | 1150 | 1.0 | 1700*1500 | 1000*2100 | 2300*2200 | 1500 | 4400 | 2300*2120*2500 | 45 |
| 1.6/1.75 | 1700 | 4500 | 96 | ||||||
| 2.0 | 1800 | 4900 | 120 | ||||||
| 2.5 | 2000 | 5100 | 150 | ||||||
| 3.0 | 2600 | 5600 | 150 | ||||||
| 3.5 | 3100 | 5950 | 180 | ||||||
| 4.0 | 3850 | 6350 | 180 | ||||||
| 16 | 1250 | 1.0 | 1950*1400 | 1100*2100 | 2550*2100 | 1500 | 4400 | 2600*2100*2500 | 45 |
| 1.6/1.75 | 1700 | 4500 | 96 | ||||||
| 2.0 | 1800 | 4900 | 120 | ||||||
| 2.5 | 2000 | 5100 | 150 | ||||||
| 3.0 | 2600 | 5600 | 150 | ||||||
| 3.5 | 3100 | 5950 | 180 | ||||||
| 4.0 | 3850 | 6350 | 180 | ||||||
| 18 | 1350 | 1.0 | 1950*1500 | 1100*2100 | 2550*2250 | 1500 | 4400 | 2600*2200*2500 | 45 |
| 1.6/1.75 | 1700 | 4500 | 96 | ||||||
| 2.0 | 1800 | 4900 | 120 | ||||||
| 2.5 | 2000 | 5100 | 150 | ||||||
| 3.0 | 2600 | 5600 | 150 | ||||||
| 3.5 | 3100 | 5950 | 180 | ||||||
| 4.0 | 3850 | 6350 | 180 | ||||||
| 21 | 1600 | 1.0 | 1950*1750 | 1100*2100 | 2550*2500 | 1500 | 4400 | 2600*2500*2500 | 45 |
| 1.6/1.75 | 1700 | 4500 | 96 | ||||||
| 2.0 | 1800 | 4900 | 120 | ||||||
| 2.5 | 2000 | 5100 | 150 | ||||||
| 3.0 | 2600 | 5600 | 150 | ||||||
| 3.5 | 3100 | 5950 | 180 | ||||||
| 4.0 | 3850 | 6350 | 180 | ||||||
Note: the parameter table shows the standard design of our small machine room passenger elevator. We also can design elevator for you with your parameter.
Welcome experienced elevator company act as our distributors/agent to cooperate with us on long term basis. We would like to provide our distributor/agent promotion price as reward for the cooperation. if you are interested, please do not hesitate to contact with us. Thanks!
