Open & Close Type
Automatic
Lift Mechanism
Lift Chain
Deceleration Device
Without Deceleration Device
Guide Rail
T Guide
Elevator Door
6 Panel Center Opening
Door Knife
Single
Attendant
Without Attendant
Transport Package
Wooden Case
Trademark
FUJI
Origin
Zhejiang Province, China
HS Code
8428101090
Production Capacity
50000 Units
After-sales Service:
24 Online Support
Warranty:
12 Month
Type:
Wellhole
Load Capacity:
3000kg-5000kg
Speed:
0.5m/S-1.0m/S
Drive Mode:
AC
Good Price China Fuji Good Quality Car Elevator Manufacture Factory Make Big Capacity 5000KG Car Elevator Lift
Introduction of fuji car elevator lift
Fuji car elevator is a kind of special elevator to solve the problem of automobile vertical transportation. The standard load of 3000 kg, 5000 kg. The rate of 0.25 to 0.5 m/s. As important automobile vertical transportation tools, compared with the traditional car ramp, elevator car can save 80% of the construction area and more than twice as many car flow efficiency.
Advantage of the fuji car lift :
a, Smooth and efficient :By adopting the high efficiency helical gear traction machine and ac frequency conversion control drag system, it effectively avoids the shaking caused by uneven force of the car. Use infrared remote control to set up, do not need to get off, in the car can realize the operation of the car lift.
b,Safe and convenient :The door machine is equipped with infrared parking protection device, the floor of the fuji car lifts can be equipped with safety guiding device, and the whole car is made of high quality steel, which can be opened back and forth to make the car in and out more secure.
c, loading and unloading of the load, the load of the car elevator is sharply reduced, and the car's load is uneven. This is very different from the way that ordinary cargo lifts are loaded gradually or unloaded. Automobile elevator structure design should be able to adapt to this characteristic.
d,the rated load is more than 3 tons, and the car is large enough to carry all kinds of small cars;
e, It is convenient for the car to enter and exit the elevator.
f, A car suitable for carrying cars. The car is the only element in the definition of the car elevator to distinguish the fuji car lift from other elevators, which determines that the interior size of the fuji car elevator should fit in with the passenger car shape. According to the definition standard of the new economical sedan and the specification for the building design of the garage, the size and weight of the vehicle design models are determined (see table 1). Therefore, the fuji car elevators car size should also be determined.
Specification of the fuji car elevator
MRL car elevator specification :
TYPE : WTQJ3000
CAPACITY:3000 SPEED (m/s) :0.5/ 1.0 CAR SIZE (mmW*mmD) : 2500*6000
SHAFT SIZE (mmW*mmD): 4200*6500 PIT mm: 1700 OVERHEAD : 5000mm
TYPE : WTQJ4000
CAPACITY:4000 SPEED (m/s) :0.5/ 1.0 CAR SIZE (mmW*mmD) : 2800*7000
SHAFT SIZE (mmW*mmD): 4600*7500 PIT mm: 1700 OVERHEAD : 5000mm
FAQ
1. What is specificaiton do quotation need ?
a. Shaft size how much ?
b. Its do 3000KG 4000KG or 5000KG ?
c.On the top of shaft have machine room or not ?
d.Speed do 0.5 m/s or 1.0m/s ?
e.How many floors its traveling ?
2. Payment terms
30% before production 70% before delivery
3.Production time
After recevie downpayment ,confirm all contract specification and drawing 35 days prodcution time . if its urgent can do 30 days .
4.How installation
We are elevator escalator manufacture ,you can find a installation company at local to do maintance and installation .
Introduction of fuji car elevator lift
Fuji car elevator is a kind of special elevator to solve the problem of automobile vertical transportation. The standard load of 3000 kg, 5000 kg. The rate of 0.25 to 0.5 m/s. As important automobile vertical transportation tools, compared with the traditional car ramp, elevator car can save 80% of the construction area and more than twice as many car flow efficiency.
Advantage of the fuji car lift :
a, Smooth and efficient :By adopting the high efficiency helical gear traction machine and ac frequency conversion control drag system, it effectively avoids the shaking caused by uneven force of the car. Use infrared remote control to set up, do not need to get off, in the car can realize the operation of the car lift.
b,Safe and convenient :The door machine is equipped with infrared parking protection device, the floor of the fuji car lifts can be equipped with safety guiding device, and the whole car is made of high quality steel, which can be opened back and forth to make the car in and out more secure.
c, loading and unloading of the load, the load of the car elevator is sharply reduced, and the car's load is uneven. This is very different from the way that ordinary cargo lifts are loaded gradually or unloaded. Automobile elevator structure design should be able to adapt to this characteristic.
d,the rated load is more than 3 tons, and the car is large enough to carry all kinds of small cars;
e, It is convenient for the car to enter and exit the elevator.
f, A car suitable for carrying cars. The car is the only element in the definition of the car elevator to distinguish the fuji car lift from other elevators, which determines that the interior size of the fuji car elevator should fit in with the passenger car shape. According to the definition standard of the new economical sedan and the specification for the building design of the garage, the size and weight of the vehicle design models are determined (see table 1). Therefore, the fuji car elevators car size should also be determined.
MRL car elevator specification :
TYPE : WTQJ3000
CAPACITY:3000 SPEED (m/s) :0.5/ 1.0 CAR SIZE (mmW*mmD) : 2500*6000
SHAFT SIZE (mmW*mmD): 4200*6500 PIT mm: 1700 OVERHEAD : 5000mm
TYPE : WTQJ4000
CAPACITY:4000 SPEED (m/s) :0.5/ 1.0 CAR SIZE (mmW*mmD) : 2800*7000
SHAFT SIZE (mmW*mmD): 4600*7500 PIT mm: 1700 OVERHEAD : 5000mm
FAQ
1. What is specificaiton do quotation need ?
a. Shaft size how much ?
b. Its do 3000KG 4000KG or 5000KG ?
c.On the top of shaft have machine room or not ?
d.Speed do 0.5 m/s or 1.0m/s ?
e.How many floors its traveling ?
2. Payment terms
30% before production 70% before delivery
3.Production time
After recevie downpayment ,confirm all contract specification and drawing 35 days prodcution time . if its urgent can do 30 days .
4.How installation
We are elevator escalator manufacture ,you can find a installation company at local to do maintance and installation .
Send Message
