Model NO.
GRE20
Cascade Level
Two
Driving Type
AC Elevator
Railing Form
EX-P
Step Road Linetype
Spiral
Application
Indoor, 16-Hr Daily
Travel Height
No More Than 16m
Inclination Angle
30 Degree
Step Width
600/800/1000
Horizontal Steps
3/3
Main Power
380V, 50Hz, 3phase
Balustrade
Tempered Glass 10mm
Handrail Bracket
Stainless Steel
Handrail
Black
Balustrade Height
900
Transport Package
Standard Wooden Cases for Export
Specification
CE, ISO9001, ISO14001 ceritifcates
Trademark
SRH(Safe Reach)
Origin
Zhejiang, China
HS Code
8428101090
Production Capacity
40, 000sets/Year
Type:
Light
Load Capacity:
9000 Persons/H
Use of Occasions:
Indoor Type
Speed:
0.5M/S
Slope Angle:
30°
Width of Stair:
1000mm
Sicher Escalator Features:
Advanced Technology
Streamlined handrail system in stainless steel reflects noble style of western Europe with its 180 degree arc end and black inlet
The Saftey protection functions as many as 21 items fuly comply with national and European standard
Automatic Lubrication system lubricates all kinds of driving components, which prolongs products's operation lift greatly
The application of VVVF drive makes escalator be a representation energy saving product. By checking the traffic flow timely by means of phto electric sensor located at the entrance of escalator, achieving auto moving with great energy saved
Micro-computer controlled system performs with rapid calculation speed,high reliable moving and also with failure code fixed, easy to be maintained.
Drive device arranged vertically assure enough space and convinience for maintennance.
SRH Factory Overview
SRH Sixteen Production Line
SRH Escalator Production Workshop
| GRE20 | ||
| Standard configuration | ||
| Application | Indoor. 16-hr operation daily | |
| H(m) | ≤7.2(6) | |
| Inclination (°) | 30(35) | |
| Step width (mm) | 600/800/1000 | |
| Horizontal steps | 2/2 3/3(Only for 30°) | |
| Speed(m/s) | 0.5 | |
| Main power | 380V/50Hz/3P | |
| Balustrade | Tempered glass(10mm) | |
| Handrail bracket | Stainless steel | |
| Handrail | Black | |
| Balustrade height (mm) | 900 | |
| Inner & outer decking | Hairline St.St. | |
| Skirting | Wear resistant coating steel sheet | |
| Step | Stainless steel | |
| Landing plate | Stainless steel (anti-sliding) | |
| illumination | lighting under upper & lower landing steps | |
| Indicator | Failure code indicator on control cabinet | |
| Operation | Emergency stop button / Key switch / Inspection operation | |
| Optional configuration | ||
| Application | Semi-outdoor/outdoor. 16-hr operation daily | |
| Handrail bracket | Aluminum profile | |
| Handrail | Green, red, blue, yellow | |
| Balustrade height | 1000mm | |
| illumination | Skirting lighting | |
| Comb lighting | ||
| Indicator | Indicator on outer decking | |
| Direction indicator | Running direction indicator on outer decking | |
| Step(escalator) | One-piece aluminum | |
| Skirting | Hairline St.St. | |
| Landing plate | Aluminum alloy (anti-sliding) | |
| Energy control | VVVF | |
| Lubrication | Automatic lubrication / electric lubrication | |
| External cladding | Hairline St.St. / Painted steel /Glass/Mirror st.st. | |
| Safety devices | ||
| Static electricity protection of step | Eliminate static electricity raised from running of the steps . | Standard |
| Static electricity protection of handrail | Eliminate static electricity raised from running of the handrail. | Standard |
| Emergency stop button on entrance | Push the emergency stop button to stop the escalator (moving walk) against emergency raise. | Standard |
| Handrail entry safety protection | Protection against risk of other objects being jammed into handrail entry. | Standard |
| Over speed protection | Protection against risk of speed being over 20% of rated speed. | Standard |
| Under speed protection | Protection against risk of speed being less than 20% of rated speed. | Standard |
| Unintentional reversal protection | Protection against risk of unintentional reversal of the direction of travel. | Standard |
| Phase failure protection | Protection against risk of phase failure. | Standard |
| Short circuit protection | Protection against risk of short circuit. | Standard |
| Over-load protection | Protection against risk of motor continually over load. | Standard |
| Step sagging protection | Protection against risk of steps being breakage and sagging. | Standard |
| S tep sagging protection | P rotection against risk of step chain being breakage of undue elongation | Standard |
| Step chains safety protection | Protection against risk of step chains being breakage of undue elongation. | Standard |
| Comb safety guard | Protection against risk of foreign objects being trapped at the point where the step enters the comb. | Standard |
| Inspection socket | To provide voltage to inspect or maintain. | Standard |
| Machine room guard | One safety plate separates machine room from movable parts such as step to protect service personnel. | Standard |
| Emergency stop button on control cabinet | Push the emergency stop button to stop the escalator (moving walk) against emergency raise when inspection and maintaining. | Standard |
| H andrail speed-detection protection | W hen handrail speed is 15% lower than the step speed, it stops in 15 seconds. | Standard |
| Brake over-distance protection | When step brake distance is 1.2 times larger than the stipulated distance, it prevents it from start again. | Standard |
| Skirting guard | Protection against risk of foreign objects being jammed into clearance between steps and skirting. | Standard |
| Floor anti-start protection | It stops when the floor plate is removed or opened. | Standard |
| Main drive chains safety protection | Protection against risk of drive chains being breakage or undue elongation. | Standard |
| Skirting brush | Brushes on skirting to enhance the passenger's safety. | Standard |
| Host brake detection | When it detects the release condition of the host brake, it prevents it from start before its release | Standard |
| Anti-crawl device | It prevents the passengers from crawling to external handrail | Optional |
| Anti-skid device | It installs outer cover plate which is closed to handrail height. It prevents the passengers from accidental crawl, skid,fall. | Optional |
| Arrester | It prevents the passengers from entering into the area between wall and handrail, between two escalators(moving walks) | Optional |
| Protection baffle | Protection baffle is set in the crossing of outer handrail edge and any obstacle. | Optional |
| Auxiliary brake | Auxiliary brake will act and stop the escalator (moving walk) in case of main drive chains breakage or the steps or handrail changing from present direction of motion. | |
Send Message
