| Standard configuration | |
| Inclination (°) | 30(35) |
| Step width (mm) | 600/800/1000 |
| Horizontal steps | 2/2 3/3(for 30°), 2/2 for 35° |
| Speed(m/s) | 0.5 |
| Motor power | 8/11/15KW |
| Handrail bracket | Stainless steel |
| Rise height for 600 | 3000≤H≤6000/ 6000≤H≤7200 |
| Rise height for 800 | 3000≤H≤4800/4800≤H≤6000/6000≤H≤6400/6400≤H≤7200 |
| Rise height for 1000 | 3000≤H≤4800/4800≤H≤6000/6000≤H≤6400/6400≤H≤7200 |
1.VVVF drive
2.Stable safety system
3.Perfect running performance
4.Advanced control system(German technology)
5.Comfortable and efficient
6.Lower noise and energy-saving
Safety Features
1.Lack of phase, error phase protection:
If lack of phase (moving-walk) will or eror phase has been checked out, the escalator automatically stop the operation.
2.Motor over-Ioad protection:
When the current exceeds 15% of the current rating, the escalator will automatically slop the operation.
3.Electrical appliance loop protection:
It offers the automatic circuit disconnecting device to protect the circuit and mains components of the escalator (moving-walk).
4.Handrail inlet protection:
When some foreign substance has been clipped in the handrail inlet. the escalator (moving-walk) will automatically slop the operation.
5.Comb plate safety device:
When some foreign substance has been clipped in or between the combs.the escalator (moving-walk) will automatically stop the operation.
6.Step sagging protection device:
When there is abnormal step bending, the escalator (moving-walk) will stop the operation before the step entering into the comb plate
7.Broken drive-chain safety device:
When the drive-chain has been over-stretched or it is broken, the escalator (moving-walk) will automatically stop the operation
8.Broken step chain protection:
When the step (plate) chain has been over-stretched or it is broken, the escalator (moving walk) will automatically slop the operation.
9.Over-speed protection:
When there is over-speed to the escalator (moving walk),it will automatically stop the operation.
10.Direction reversal protection:
When it comes the unintentional reve rsal of the direction of travel, the escalator (moving walk) will automatically stop the operation.
11.Security line:
The yellow synthetic resin security line is located in the front position and two sides of the escalator tread so that the passengers will not tread in-between the edge of the adjacent step and the group lengthened skirt panel. The security line on both sides of the step is higher than the tread surface. (The moving-walk offers the selective yellow spray-palmed security line.)
About Safeelevator
