Hot Search： perfume lining mr333501 205/75r17.5 250cc motorcycle truck tire atv quad atv tire car lift cargo trailer

Cautop > Categories > Vehicles > Elevator & Funicular Car > Construction Elevator

Building Material Lifting Outdoor Hoist, Crane, Building Lift

Product detail

Model NO.

Mechanical Equipment Passenger and

Lift Mechanism

Rack and Gear

Attendant

With Attendant

Deceleration Device

With Deceleration Device

Elevator Door

Straight Fractional Door

Wall-Tie Adjust Length&Qty

2.8-3.2m 1pieces/5 Mast (Can Be Adjusted)

Rated Lifting Speed

60m/Min

Mast Section Weight

145-180kg (Double Racks)

Max Erection Height

Mast Section Size

650X650X1508mm (or 800X800X1508mm)

Double Cage(with Operation Cabin or No Cabin)

Main Electrical System

Schneider(Can Be Equipped with PLC Fault Sensor )

Motor Power

2X13kw Per Cage

Cage Dimension

3*1.5*2.2m, 3*1.3*2.2m, 3.2*1.5*2.2m(Changeable )

Transport Package

Container

Specification

SC100, SC200, SC150, SC100Z, SC150Z, SC200Z

Trademark

XINGDOU

Origin

China

HS Code

84281090

Production Capacity

1000sets / Year

Type:

Rack and Gear

Load Capacity:

Speed:

40M/Min - 60M/Min

Usage:

Construction Hoist

Sling Type:

Chain

Lift Drive / Actuation:

Electric Motor

SC200/200 500M Construction Hoist/Building Lift/Rack and Pinion elevator/Construction Elevator

Shandong Xingdou is a professional manufacturer of construction hoist
Building Material Lifting Outdoor Hoist

Technicaldata(OEM)

Product Type	Model	Lifting Speed(m/min)	Max Height(m)	Drive Unit	Safety Device	Electronic Control Systerm
Direct driving PLC	SC100/100	33 m/min	150m	*211KW**	SAJ30-1.2	PLC
	SC150/150	33 m/min	150m	*215KW**	SAJ40-1.2	PLC
	SC200/200	33 m/min	150m	*311KW**	SAJ40-1.2	PLC
Low Speed VFD	SC100/100L	0-40 m/min	250m	*211KW**	SAJ40-1.2	30KW VFD
	SC150/150L	0-40 m/min	250m	*213KW**	SAJ40-1.2	30KW VFD
	SC200/200LA	0-33 m/min	250m	*213KW**	SAJ40-1.2	30KW VFD
	SC200/200LB	0-40 m/min	250m	*215KW**	SAJ40-1.2	37KW VFD
	SC200/200LC	0-46 m/min	250m	*311KW**	SAJ40-1.2	37KW VFD
Mid Speed VFD	SC200/200MA	0-55 m/min	350m	*219KW**	SAJ40-1.4	45KW VFD
	SC200/200MB	0-60 m/min	350m	*223KW**	SAJ40-1.4	55KW VFD
	SC200/200MC	0-63 m/min	350m	*315KW**	SAJ50-1.4	55KW VFD
	SC200/200MD	0-72 m/min	350m	*319KW**	SAJ50-1.6	75KW VFD
High Speed VFD	SC200/200HA	0-80 m/min	450m	*323KW**	SAJ50-1.6	75KW VFD
	SC200/200HB	0-90 m/min	450m	*326KW**	SAJ50-2.0	90KW VFD
	SC200/200HC	0-100 m/min	450m	*332KW**	SAJ50-2.0	110KW VFD
	SC200/200HD	0-120 m/min	550m	*319KW**	SAJ50-2.4	75KW VFD

Production description:

1.could be design according to different building situation.	5. All Production Line adopt special fixture, mould, gauge made by us to ensure all detaile size.
2. With ISO9001, CE, SGS, BV, SASO certifications	6. Select high quality raw material from China Bao Steel Group, other like motors, reducers, gearbox, safety device with low noise, electrics is schneider or Korea repute brand with reliable quality.
3. Double or Single cage with loading capacity from 500kg to 3000kg.	7. Special design, compact and reasonable structure, easy to installation and adjustment.
4. With Frequency Inverter or DOL control system with low speed, MID speed, and high speed	8. Each equipment should be test and make record in Factory, all details will be adjust like Motor brake, safety device operation, all limit switch operation, dropping test, loading test, and mast section erection test to ensure the completed equipment run well when taken into use.

Product Details:
A. Production process:Strict material selection- blanking- inspection - welding-inspection- Blasting - inspection -Baking finished or galvanized- inspection -Finished product

Special design for Cage:
1. bottom and roof of Cage adopt  trapezoidal frame
2. Bottom and the roof are full symmetry
3. The plane of symmetry are connected by  Bending plate,  Bending channel and  square pipe which make it  firm, straight and balance in use.
4. The wall around cage can be fixed by Punched  Aluminium plate, Punched zinc plate, steel wire mesh.
5. Surface Treatment: Blasting, Baking finished,Galvanized

B:About the mast section

1. Steel plates are bented of U-shape to strengthen the mast section.

2. Mast section with galvanized coat or heat spray coat can be chosen.

3. High quality steel plate Q345B bended by special machine: Thickness 4.5mm.

4. Welded steel tube Q345B and seamless steel tube 20# are also available: Ø76*4.5mm or Ø89*4.5mm

(Thickness of 6mm or 8mm is also available).

5. 650*650*1508mm is the most common size fits for clients. Other model of mast section can choose:

450*450*1508mm, 650*900*1508mm,800*800*1508mm

Building Material Lifting Outdoor Hoist

About us:

Shandong Xingdou Intelligent Equipment Co.,Ltd in the country has 26 overseas
offices, the country has nearly 200 sales outlets, establish a sound system of the service network.

After-sale services