Model NO.
X-803-1
Volt
12V /24V
Model
X-803-1
Packing Size
1set/CTN(Carton:320*270*150mm)
Own Weight
5kgs/Set
Drive Mode
Electric
Transport Package
Carton(320*270*150mm)
Specification
ISO 10542-2
Trademark
Xinder
Origin
Changzhou Jiangsu Province, China
HS Code
8708999990
Production Capacity
1000 Sets Per Month
Type:
Safety Belt
Bumper Position:
Cabin
Material:
Steel
Product Introduction
Wheelchair docking system can ensure the safety of wheelchair by a simple way during vehicle running with easy operation. When the wheelchair drives into docking system and the lock pin on wheelchair will insert into lock fixed on floor, it will be locked automatically. If you want to leave docking system, you just need to push release switch to release lock. The advantage of wheelchair docking system is that it needn't safety belt and constrain wheelchair by retractor or safety belt.
CHARACTERISTICS
Ø Safety, the lock can be only released when ignition is OFF. In case wheelchair passenger be injured when driver push release switch wrongly during running.
Ø If the wheelchair is not locked, the warning alarm sounds. Only when wheelchair is locked, the warning alarm stops.
PRINCIPLE
This wheelchair docking system has an external switch, mainly relies on electromagnets to achieve work.
When push on the wheelchair, S2 switch off, electromagnet pull-in, Buzzer long call, docking close, S2 reset,S1 close, buzzer close; when release the wheelchair, press the external switch,S1,S2 switch off, electromagnet pull-in, Buzzer long call, docking release, lock release, release the wheelchair, S2 reset.
Wheelchair docking system can ensure the safety of wheelchair by a simple way during vehicle running with easy operation. When the wheelchair drives into docking system and the lock pin on wheelchair will insert into lock fixed on floor, it will be locked automatically. If you want to leave docking system, you just need to push release switch to release lock. The advantage of wheelchair docking system is that it needn't safety belt and constrain wheelchair by retractor or safety belt.
CHARACTERISTICS
Ø Safety, the lock can be only released when ignition is OFF. In case wheelchair passenger be injured when driver push release switch wrongly during running.
Ø If the wheelchair is not locked, the warning alarm sounds. Only when wheelchair is locked, the warning alarm stops.
PRINCIPLE
This wheelchair docking system has an external switch, mainly relies on electromagnets to achieve work.
When push on the wheelchair, S2 switch off, electromagnet pull-in, Buzzer long call, docking close, S2 reset,S1 close, buzzer close; when release the wheelchair, press the external switch,S1,S2 switch off, electromagnet pull-in, Buzzer long call, docking release, lock release, release the wheelchair, S2 reset.
Send Message
