Model NO.
surtek3668
Features
Environment Friendly & Solvent-Free & Primerless
Characteristic
Waterproof
Delivery Time
7-10 Days
Color
Black
Shipping
by Sea/Air/Express/Load
Density
1.20±0.05 Kg/L
Cure Mechanism
Moisture-Curing
Non-Sag Properties
Good
Shore a Hardness
~ 60
Shear Strength
≥ 5 N/mm^2
Transport Package
Pallet/Carton/Box/Drum
Specification
310ml cartridge/400ml sausage/600ml sausage/200KG
Trademark
Surtek
Origin
China
HS Code
3506100090
Production Capacity
72000000PCS/Year
Type:
Polyurethane Sealant for Windshield
Material:
Polyurethane
Bonding Faction:
Instant Adhesive
Application:
Automobile
CAS No.:
Reference to MSDS
Main Agent Composition:
Polyurethane Elastomer
Description:
Surtek 3668 is a one component, solvent free, high strength polyurethane adhesive sealant. It is non-sag, curing fast, of good initial strength. It does not contain solvent or PVC. And it has good vibration and weather resistance. The product is manufactured in accordance with ISO9001/ISO14001/TS16949.
Characteristics:
One component, easy to apply
No sagginess, easy to apply in vertical surface
Fast cure
Solvent free
Aging resistant
Uses:
Surtek 3668 is used for windshield direct glazing. It is widely used for structural bonding and installation for windscreen of car, bus, train, boat, ect.
Application Note:
1. Use Comensflex Activator to make the substrate surface clean, dry, free of dust or grease.
2. Shake Comensflex Primer bottle to make the material even before using it. Use brush to apply the primer onto the cleaned surface for a thin layer.
3. Apply the sealant after the primer dried. Install the glass before the sealant tack free. The best working temperature is 20-30°C, humidity 50-70%
4. The sealant cures with moisture in the air. The lower the temperature and humidity is, the slower the curing is; and the higher the temperature and humidity is, the faster the curing is. Too high temperature and humidity may cause bubble in the cured sealant.
5. Avoid the adhesive sealant from alcohol, acid, ammonia chemicals. These chemicals will cause the adhesive sealant uncured.
Technical Data Sheet of Surtek 3668:
Specification:
Cartridge: 310ml/cartridge, 20 cartridges/carton
Sausage: 400ml/sausages, 600ml/sausage, 20 sausages/carton
Drum: 200L/drum
Storage and Shelf Life:
When stored at the recommended conditions in original, unopened containers, this product has a shelf life of 9 months.
The recommended storage temperature is 5-25°C, humidity is <50% RH. It is strictly prohibited that the transportation or storage temperature is over 30°C or the humidity is over 80% RH. And high-temperature container transportation is prohibited as well.
Partners:
Packaging & Shipping:
Company Profile:
Production Base:
Automatic Production Lines and Quality Assurance:
Global Sales Network:
Certificates:
COMENS,A FULL RANGE OF SOLUTIONS
FOR MULTIPLE INDUSTRIES
Surtek 3668 is a one component, solvent free, high strength polyurethane adhesive sealant. It is non-sag, curing fast, of good initial strength. It does not contain solvent or PVC. And it has good vibration and weather resistance. The product is manufactured in accordance with ISO9001/ISO14001/TS16949.
Characteristics:
One component, easy to apply
No sagginess, easy to apply in vertical surface
Fast cure
Solvent free
Aging resistant
Uses:
Surtek 3668 is used for windshield direct glazing. It is widely used for structural bonding and installation for windscreen of car, bus, train, boat, ect.
Application Note:
1. Use Comensflex Activator to make the substrate surface clean, dry, free of dust or grease.
2. Shake Comensflex Primer bottle to make the material even before using it. Use brush to apply the primer onto the cleaned surface for a thin layer.
3. Apply the sealant after the primer dried. Install the glass before the sealant tack free. The best working temperature is 20-30°C, humidity 50-70%
4. The sealant cures with moisture in the air. The lower the temperature and humidity is, the slower the curing is; and the higher the temperature and humidity is, the faster the curing is. Too high temperature and humidity may cause bubble in the cured sealant.
5. Avoid the adhesive sealant from alcohol, acid, ammonia chemicals. These chemicals will cause the adhesive sealant uncured.
Technical Data Sheet of Surtek 3668:
| Appearance | Uniform Paste |
| Color | Black |
| Density | 1.20 ± 0.05 kg/l |
| Tack-free time* | 20~40 min |
| Rate of cure* | ~3.5 mm per 24 hrs |
| Shore A hardness | 60±5 |
| Tensile strength | ≥8 /mm2 |
| Elongation at break | ≥400% |
| Tear strength | ≥10 N/mm |
| Shear strength (without primer) | ≥5 N/ mm2 |
| Service temperature (continuous) Short - term (up to 48 hrs) | -40°C to +90°C 130°C |
Specification:
Cartridge: 310ml/cartridge, 20 cartridges/carton
Sausage: 400ml/sausages, 600ml/sausage, 20 sausages/carton
Drum: 200L/drum
Storage and Shelf Life:
When stored at the recommended conditions in original, unopened containers, this product has a shelf life of 9 months.
The recommended storage temperature is 5-25°C, humidity is <50% RH. It is strictly prohibited that the transportation or storage temperature is over 30°C or the humidity is over 80% RH. And high-temperature container transportation is prohibited as well.
Partners:
Packaging & Shipping:
Company Profile:
Production Base:
Automatic Production Lines and Quality Assurance:
Global Sales Network:
Certificates:
COMENS,A FULL RANGE OF SOLUTIONS
FOR MULTIPLE INDUSTRIES
Send Message
