Model NO.
NFFJH-2.2/1C
Control Mode
Rotary Control
Certification
ISO, CE
Model
Nffjh-2.2/1c
Certificate
CE
Quality
High
Rated Voltage
DC12V
Short-Term Maximum
8-10A
Heat Power (W)
900-2200
Fuel Type
Diesel
Working Altitude
Less Than 5000m
Heater Weight (Kg)
11.8
Dimensions (mm)
492*359*200mm
Controller
Rotary Control
Brand
NF
Application
Camper RV
Production Function
Heating
Packing
Carton
Transport Package
Carton
Specification
492*359*200mm
Trademark
NF
Origin
Hebei, China
HS Code
8516800000
Production Capacity
50000pieces/Year
After-sales Service:
Yes
Warranty:
1 Year
Function:
Heating
Air and stove heater (hereinafter referred to as the fuel stove) is an integrated stove, heating air as one of the special RV fuel stove.The stoves can also be used for cooking in the wild, such as on ships.
Single installation two-in-one unit saves space and weight. Ideal for small camper vans with limited space. Efficient and economical unit is excellent for off-grid environments.
Function
This fuel stove is a safe diesel stove with no open flame.The fuel stove is not allowed to be used during running.
--Cooking mode
Adjust the heating power by controlling the switch to cook and heat various kinds of food
-- Air conditioning mode
Close the upper cover and adjust the setting temperature by controlling the switch to heat the room temperature.
Rated Voltage | DC12V |
Short-term Maximum | 8-10A |
Average Power | 0.55~0.85A |
Heat Power (W) | 900-2200 |
Fuel type | diesel |
Fuel Consumption (ml/h) | 110-264 |
Quiescent current | 1mA |
Warm Air Delivery | 287max |
Working (Environment) | -25ºC~+35ºC |
Working Altitude | ≤5000m |
Heater Weight (Kg) | 11.8 |
Dimensions (mm) | 492×359×200 |
Stove vent(cm2) | ≥100 |
| 1-The host; | 2-Buffer; |
| 3-Fuel pump; | 4-Nylon tubing (blue, fuel tank to fuel pump); |
| 5-Filter; | 6-Suction tubing; |
| 7-Nylon tubing(transparent, main engine to fuel pump); | 8-Check valve; |
| 9-Air inlet pipe; | 10-Air filtration (optional); |
| 11-Fuse holder; | 12-Exhaust pipe; |
| 13-Fireproof cap; | 14-Control switch; |
| 15-Fuel pump lead; | 16-Power cord; |
| 17-Insulated sleeve; |
Installation of inlet and outlet pipes:
The combustion air must be inhaled from the fresh air outside the vehicle;
The exhaust gas from combustion must be discharged into the atmosphere through the exhaust pipe, and must not enter the car.
Prevent the exhaust gas from burning to cause the danger of poisoning. Pipe line through the vehicle's outer wall or bottom through hole, must be able to seal to prevent exhaust entry.
Inlet pipe and exhaust pipe must be equipped with accessories of this machine.
The connection between the intake pipe and exhaust pipe and the main engine shall be fastened on the combustion inlet and exhaust pipe with matching clips.
The outlet of theexhaust pipe should be positioned so that thedischarged gas is not taken in by the intake pipe or the car heating fan (i.e. away from theintake pipe and car heating fan).
Our factory's production units are equipped with high tech machineries, strict quality,control testing devices and a team of professional technicians and engineers endorsing the quality and authenticity of our products.
In 2006, our company has passed ISO/TS16949:2002 quality management system certification. We also bagged the CE certificate and Emark certificate making us among the only few companies in the world acquiring such high level certifications.
Currently being the largest stakeholders in China, we hold a domestic market share of 40% and then we export them around the globe particularly in Asia, Europe and Americas.
Currently being the largest stakeholders in China, we hold a domestic market share of 40% and then we export them around the globe particularly in Asia, Europe and Americas.
Meeting the standards and demands of our customers have always been our top priority. It always encourages our experts to continuously brain storm, innovate, design and manufacture new products, impeccably suitable for the Chinese market and our customers from every nook of the world.
Q1. What is your terms of packing?
A: Generally, we pack our goods in neutral white boxes and brown cartons. If you have legally registered patent, we can pack the goods in your branded boxes after getting your authorization letters.
Q2. What is your terms of payment?
A: T/T 30% as deposit, and 70% before delivery. We'll show you the photos of the products and packages before you pay the balance.
Q3. What is your terms of delivery?
A: EXW, FOB, CFR, CIF, DDU.
Q4. How about your delivery time?
A: Generally, it will take 30 to 60 days after receiving your advance payment. The specific delivery time depends on the items and the quantity of your order.
Q5. Can you produce according to the samples?
A: Yes, we can produce by your samples or technical drawings. We can build the molds and fixtures.
Q6. What is your sample policy?
A: We can supply the sample if we have ready parts in stock, but the customers have to pay the sample cost and the courier cost.
Q7. Do you test all your goods before delivery?
A: Yes, we have 100% test before delivery
Q8: How do you make our business long-term and good relationship?
A:1. We keep good quality and competitive price to ensure our customers benefit ;
2. We respect every customer as our friend and we sincerely do business and make friends with them, no matter where they come from.
Send Message
