Model NO.
CG125/CD70/SUPRA/WAVE125
Type
Motorcycle Brake
Material
Alloy
Model
Cg125
Size
110*25mm
MOQ
5000 Sets
Brand Name
Yitong
Place of Origin
Hubei, China(Mainland)
Life
Long and Security
Brake Lining Material
Asbestos
Code
Cg125-0101
Specifications
1.No noise and dust
2.Senstive to brake
3.Reasonable price
4.Offer many models
The Material of Brake Shoe-- Aluminum rack:ADC12 Aluminum Alloy
The aluminum rack of brake shoes are processed by 180 ton high pressure casting machine, which will ensure the aluminum rack is hard and high density without any air bubble inside.
The Material of Brake Shoe—Brake lining:Asbestos, Soft Leather, Non-Asbestos
The special formulations of this brake shoes friction material make it low noise, good thermal recession and recovery, good performance of water recession.
Many different models for you to choose:
General Motorcycle Maintenance Tips ------- Brakes
Tip:Brake fluid absorbs moisture over time and becomes less effective.Replace brake fluid every one to two years and your brakes will preform the best they can.
Motorcycles have up to two brake fluid reservoirs, one for the front, usually found on the handlebars and one for the back.Both should be checked regularly.Topping up should only be done from a new, sealed bottle as brake fluid tends to absorb moisture over time.If your brake pads are thin and due for replacement.Beware - brake fluid, if spilt on paintwork eats right through to the bare metal.
Also check the thickness of the brake pads.If you allow them to go right down to the metal your brake disc will be damaged resulting in an unnecessary and expensive replacement.Fitting braided steel brake lines will increase the performance of your brakes by roughly 50%.
Suggestion:We suggest that our clients change new brake shoe when you have run more than 15, 000 km.
Please contact us, if you want to get more informations about them, or visit as follow link:
Http://ytjcpj.en.made-in-china.com
