Brief introduction of hydraulic brake hose assembly applied to auto brake system:
| Application Environment | Sun, rain, snow, fog, wind, sand, dust erosion, salt spray, acid rain, dust |
| Construction | hydraulic brake hose |
| Applicable Medium | DOT 3# / DOT 4# brake fluid |
| Application | Applied to auto brake system. Transferring brake medium during braking process to ensure brake force could be transferred to auto brake shoe or brake caliper which will produce brake force to brake the automobile vehicle anytime. |
| Operating Temperature | -50ºC~+150ºC |
| Connection | Adopt crush or squash on rubber hose to realize permanent coupling |
| Fittings | Adding metal springs, nylon springs, rubber sheath or metal support as required |
Technical parameters of hydraulic brake hose
| Accreditation Standards | TYPE | Size | (I.D) | (O.D) | Max W.P | Max B.P | MBR | Max Inflation | W.T | ||||
| Min | Max | Min | Max | 6.9MPa | 10.3MPa | ||||||||
| (mm) | (inch) | mm | mm | mm | mm | Mpa | Mpa | mm | ml/m | ml/m | g/m | ||
| GB16897-2010 GB4784-84 FMVSS NO.106 SAE J1401 | 7410A | 3.2 | 1/8 | 3.0 | 3.4 | 9.8 | 10.5 | 10 | 49 | 37 | 0.4 | 0.55 | 100 |
| 3310 | 3.2 | 1/8 | 3.0 | 3.4 | 9.9 | 10.4 | 10 | 49 | 37 | 0.4 | 0.5 | 100 | |
| 3310A | 3.2 | 1/8 | 3.0 | 3.4 | 9.9 | 10.4 | 10 | 49 | 37 | 0.25 | 0.35 | 100 | |
| 3310L | 3.2 | 1/8 | 3.0 | 3.4 | 9.9 | 10.4 | 10 | 49 | 37 | 0.35 | 0.45 | 100 | |
| 3320E | 3.2 | 1/8 | 2.8 | 3.3 | 9.9 | 10.4 | 10 | 80 | 37 | 0.35 | 0.5 | 90 | |
Product show of hydraulic brake hose
Packaging:
* Generally: PVC bag in carton box with ORLETE logo
* Can be customized based on your requirements
Lead time:
* Fitting: common fitting within 30 days; special fitting within 40 days.
* Brake hose: within 20 days.
* Brake hose assembly: within 40 days.
Please noted: exact lead time is based on the order details.
Shipping:
* About 30 minutes from our factory to Longtan port (Nanjing port)
* Nanjing Lukou Airport is only about 40 minutes away
* conveniently by air or by ocean
How to select rubber hose?
1. Internal working medium of rubber hose: compressed air, water, engine oil, speed changing box oil, steam, etc.
2. Working temperature: including working medium temperature, surronding environment temperature.
3. Working pressure: normal operating pressure, max working pressure; to decide pulsating pressure and pulsating frequency, etc.
4. Working environment: if there is bending of rubber hose? What's the bending degree? If there is friction with car body?
5. Special requirements: including insulating property, electrical conductivity, flame retardant property, color appearance, etc
We Also Produce:
Automobile Category:
· Auto brake hose & assembly
· Air conditioner hose & assembly
· Power steering hose & assembly
· Oil & water hose
· Rubber hose oil seal
· O-ring
Railway Category:
· Brake hose assembly
· General air hose assembly
· Average hose assembly
· High-speed EMU rubber hose & assembly
· Urban vehicle brake hose assembly
· Railway bearing oil seal
· Rail vehicle elastic side bearing
· Axial rubber gasket
Other Products:
· Gas rubber hose
· Engineering hose & assembly
· Other rubber hoses
