Model NO.
TAK014
Specification
AA3003/4343/3003
Trademark
TAIALU
Origin
China
HS Code
7608201090
Production Capacity
5000ton/Year
After-sales Service:
After-Sales Service
Warranty:
1 Year
Type:
Segment
Material:
Aluminum
Certification:
ISO, CE
Transport Package:
Carton Pallet
ALUMINUM TUBE HF Welded Manifold Tube
Alloy 3003-H16, clad 4045 + 1% Zinc
High frequency welding header pipe is widely used in air conditioning heat exchange system: parallel flow condenser, evaporator.
Parallel flow condenser is mainly made up of flat tube and corrugated type shutter fin, with header pipe at both ends, according to the spacers in header pipe, it can be divided into multiple parallel flow condenser and unit parallel flow condenser. Because the unit type without segment, its refrigerant flow in the same direction, multiple type condenser is interrupted by spacers in header pipe, its biggest characteristic is high efficiency heat transfer, compact structure.
Aluminum Header pipe Manifold Pipe material uses 3003 aluminum alloy with welding flux outside.
1, The main types of Stamping parts
1), Intercooler motherboard
2), Punched Header Pipe
Cladding type: single Cladding material, double Cladding material
Cladding layer: 4045, 4343
Core layer: 3003, 3005
3), Header Pipe fittings
Cladding type: single Cladding material, double Cladding material
Cladding layer: 4045, 4343
Core layer: 3003, 3005
4), Radiator motherboard
Cladding type: single Cladding material, double Cladding material
Cladding layer: 4045, 4343
Forming: stamping
5), Radiator main side panel
Cladding type: single Cladding material, double Cladding material
Cladding type: 4045, 4343, 7072 anti-corrosion layer, zinc can be added
Material Temper: H14;
Cladding rate: 10±2 or according to customer requirements
Stamping parts-2
2, Introduction of Stamping parts
Cladding type: single Cladding material, double Cladding material
Cladding layer: 4045, 4343
Core layer: 3003, 3005
Process: stamping
Wall thickness: 1.0-3.0mm
Various types of Header Pipe stamping, evaporator D- type tube stamping, parts processing, heat exchanger core assembly.
Alloy 3003-H16, clad 4045 + 1% Zinc
High frequency welding header pipe is widely used in air conditioning heat exchange system: parallel flow condenser, evaporator.
Parallel flow condenser is mainly made up of flat tube and corrugated type shutter fin, with header pipe at both ends, according to the spacers in header pipe, it can be divided into multiple parallel flow condenser and unit parallel flow condenser. Because the unit type without segment, its refrigerant flow in the same direction, multiple type condenser is interrupted by spacers in header pipe, its biggest characteristic is high efficiency heat transfer, compact structure.
Aluminum Header pipe Manifold Pipe material uses 3003 aluminum alloy with welding flux outside.
1, The main types of Stamping parts
1), Intercooler motherboard
2), Punched Header Pipe
Cladding type: single Cladding material, double Cladding material
Cladding layer: 4045, 4343
Core layer: 3003, 3005
3), Header Pipe fittings
Cladding type: single Cladding material, double Cladding material
Cladding layer: 4045, 4343
Core layer: 3003, 3005
4), Radiator motherboard
Cladding type: single Cladding material, double Cladding material
Cladding layer: 4045, 4343
Forming: stamping
5), Radiator main side panel
Cladding type: single Cladding material, double Cladding material
Cladding type: 4045, 4343, 7072 anti-corrosion layer, zinc can be added
Material Temper: H14;
Cladding rate: 10±2 or according to customer requirements
Stamping parts-2
2, Introduction of Stamping parts
Cladding type: single Cladding material, double Cladding material
Cladding layer: 4045, 4343
Core layer: 3003, 3005
Process: stamping
Wall thickness: 1.0-3.0mm
Various types of Header Pipe stamping, evaporator D- type tube stamping, parts processing, heat exchanger core assembly.
Send Message
