Model NO.
SMSR series
Application
Crusher
Function
Speed Reduction
Layout
Coaxial
Hardness
Hardened Tooth Surface
Installation
Horizontal Type
Step
1-2 Stage
Type
Helical Gear
Ratio
5, 15, 20
Color
Blue, Grey, White Grey
Input Power
2-150kw
Output Torque
200-10000nm
Model Number
Hxgf30-100
Reducer Application
Conveyors, Mixers&Mills, Other Applications
Mounted Sharp
Cylinder
Mounting Position
Shaft Mounted
Body Material
Cast Iron
Oil Capatity(Liters)
0.4-13L
Trademark
HFT Famous Brand
Transport Package
Wooden Case, Standard Export Package.
Specification
CE, ISO9001: 2008, TUV, etc.
Origin
Wenzhou, Zhejiang, China
HS Code
8483409000
HXGF Shaft Mounted Gear Reducer is our company new design product.
For offering better choice according to our market tendency.
The better material are choosed by us for better use of our customers.
Products Benefits:
1. High efficiency
2. Small volume
3. Strong capacity of being overloaded
4. Long service life
5. Anti-leaking oil
6. Simple structure and convenient to be installed and maintained
7. Widely application
Technical table:
| Ratio:5:1 | ||||||||
| Model | HXGF30 | HXGF40 | HXGF50 | HXGF55 | HXGF65 | HXGF75 | HXGF85 | HXGF100 |
| Output(RPM) | 100-400 | 100-400 | 100-400 | 100-400 | 100-400 | 100-400 | 100-400 | 100-400 |
| Power Rating(KW) | 2.68-7.14 | 4.2-9.66 | 6.62-15.65 | 10.29-24.57 | 15.12-35.91 | 25.2-59.9 | 36.2-81.9 | 62.2-134.2 |
| Permissible torque(Nm) | 256 | 401 | 632 | 983 | 1444 | 2407 | 3457 | 5940 |
| Ratio:13:1 and 20:1 | ||||||||
| Model | HXGF30 | HXGF40 | HXGF50 | HXGF55 | HXGF65 | HXGF75 | HXGF85 | HXGF100 |
| Output(RPM) | 10-115 | 10-115 | 10-115 | 10-115 | 10-115 | 10-115 | 10-115 | 10-115 |
| Power Rating(KW) | 0.29-3.11 | 0.49-4.62 | 0.82-7.81 | 1.25-11.55 | 1.97-17.01 | 3.11-27.09 | 4.9-40.7 | 7.8-60.5 |
| Permissible torque(Nm) | 277 | 468 | 783 | 1194 | 1881 | 2970 | 4680 |
Why Choose us:
1) All torque arms/fulcrums are plated to eliminate them being rusted in use.
2) The shaft mounts have labyrinth sealing on the conveyor end and input shaft end so that the oil seal is safe from contamination.
3) The front end of the shaft mount has a hub cover to protect the front oil seal as well as moving part of the gearbox.
4) Input shaft front bearing is a roller bearing as it takes in more radial load from the belt pressure.
5) Breather plugs are extended so that the dust does not clog the breather hole.
6) All oil seals imported from Taiwan.
7) Our gear units now have higher load capacity as the gears have been redesigned.
8) All gears are case carburised to a casedepth and ground inhouse.
9) All gear units are machined on a CNC machining center so are very accurate in alignment.
10) Finish of all gear units are far superior to any other brand being sold out of India.
11) The shaft mounts are available with keyed hollow shafts or hollow taper bores with taper clamps.
