Model NO.
ZSY
Transport Package
Wooden Case
Trademark
YND
Origin
China
Production Capacity
1000000
Application:
Motor, Electric Cars, Motorcycle, Machinery, Marine, Toy, Agricultural Machinery, Car
Function:
Distribution Power, Clutch, Change Drive Torque, Change Drive Direction, Speed Reduction, Speed Increase
Layout:
Coaxial
Hardness:
Hardened Tooth Surface
Installation:
Horizontal Type
Step:
Three-Step
Three-Step Horizontal Type Good Service Hardened Tooth Surface Gear Reducer
Technical parameters
QUALITY CONTROL
Quality:Insist on Improvement,Strive for Excellence With the development of equipment manufacturing indurstry,customer never satirsfy with the current quality of our products,on the contrary,wcreate the value of quality.
Quality policy:to enhance the overall level in the field of power transmission
Quality View:Continuous Improvement , pursuit of excellence
Quality Philosophy:Quality creates value
3. Incoming Quality Control
To establish the AQL acceptable level of incoming material control, to provide the material for the whole inspection, sampling, immunity. On the acceptance of qualified products to warehousing, substandard goods to take return, check, rework, rework inspection; responsible for tracking bad, to monitor the supplier to take corrective measures to prevent recurrence.
4. Process Quality Control
The manufacturing site of the first examination, inspection and final inspection, sampling according to the requirements of some projects, judging the quality change trend; found abnormal phenomenon of manufacturing, and supervise the production department to improve, eliminate the abnormal phenomenon or state
5. FQC(Final QC)
After the manufacturing department will complete the product, stand in the customer's position on the finished product quality verification, in order to ensure the quality of customer expectations and needs.
6. OQC(Outgoing QC)
After the product sample inspection to determine the qualified, allowing storage, but when the finished product from the warehouse before the formal delivery of the goods, there is a check, this is called the shipment inspection.Check content:In the warehouse storage and transfer status to confirm, while confirming the delivery of the product is a product inspection to determine the qualified
Certifications
packaging
FAQ
Feature:
Realized parallel shaft,right-angle shaft modes and horizontal,vertical mounting modes. Using less component parts.
Applying advanced grinding process which improved the stability and the efficiency of transmit power with lower noise.
Input mode: motor connected flange, shaft input
Output mode:solid shaft with flat key,hollow shaft with flat key,hollow shaft with shrink disk,hollow shaft with spline connection, solid shaft with spline connection, solid shaft with flange.
Mounting mode:vertical, horizontal, swing base-mounted, torque-arm-mounted.
Ratio range:1.23~450. It can be higher when combining with K&R series reducer.
H & B SERIES
Transmission stage B2 (ratio from 5~18) B3 (ratio from 12.5~90) B4 (ratio from 80~400) Transmission stage H1 (ratio from 1.25~5.6) H2 (ratio from 6.3~28) H3 (ratio from 22.4~112) H4 (ratio from 100~450) Housing material HT250 high-strength cast iron Housing hardness HBS190-240 Gear material 20CrMnTi alloy steel Surface hardness of gears HRC58°~62 ° Gear core hardness HRC33~40 Input / Output shaft material 42CrMo alloy steel Input / Output shaft hardness HRC25~30 Machining precision of gears accurate grinding, 6~5 Grade Lubricating oil GB L-CKC220-460, Shell Omala220-460 Heat treatment tempering, cementiting, quenching, etc. Efficiency 92%~98% (depends on the transmission stage) Noise (MAX) 60~68dB Temp. rise (MAX) 40ºC Temp. rise (Oil)(MAX) 50ºC Vibration ≤20µm Backlash ≤20Arcmin Brand of bearings China Top brand HRB,LYC,ZWZ or other brands requested, NSK….. Brand of oil seal NAK--- Taiwan or other brands requested
Technical parameters
| Ratio | 3.41-289.74 |
| Input power | 0.12-160KW |
| Output torque | 61-23200N.m |
| Output speed | 5-415rpm |
| Mounting type | Foot mounted, flange mounted, foot and flange mounted, single-stage foot mounted, single stage flange mounted, Flange-mounted with extended bearing hub |
| Input Method | Flange input(AM), shaft input(AD), inline AC motor input, or AQA servo motor |
| Brake Release | HF-manual release(lock in the brake release position), HR-manual release(autom-atic braking position) |
| Thermistor | TF(Thermistor protection PTC thermisto) TH(Thermistor protection Bimetal swotch) |
| Mounting Position | AB |
| Type | H |
| Output shaft dis. | 20mm, 25mm, 30mm, 35mm, 40mm, 50mm, 60mm, 70mm, 90mm, 110mm, 120mm |
| Housing material | HT200 high-strength cast iron from R37,47,57,67,77,87 |
| Housing material | HT250 High strength cast iron from R97 107,137,147,157,167,187 |
| Heat treatment technology | carbonitriding and hardening treatment |
| Efficiency | 92%-97% |
| Lubricant | VG220 |
| Protection Class | IP55, F class |
QUALITY CONTROL
Quality:Insist on Improvement,Strive for Excellence With the development of equipment manufacturing indurstry,customer never satirsfy with the current quality of our products,on the contrary,wcreate the value of quality.
Quality policy:to enhance the overall level in the field of power transmission
Quality View:Continuous Improvement , pursuit of excellence
Quality Philosophy:Quality creates value
3. Incoming Quality Control
To establish the AQL acceptable level of incoming material control, to provide the material for the whole inspection, sampling, immunity. On the acceptance of qualified products to warehousing, substandard goods to take return, check, rework, rework inspection; responsible for tracking bad, to monitor the supplier to take corrective measures to prevent recurrence.
4. Process Quality Control
The manufacturing site of the first examination, inspection and final inspection, sampling according to the requirements of some projects, judging the quality change trend; found abnormal phenomenon of manufacturing, and supervise the production department to improve, eliminate the abnormal phenomenon or state
5. FQC(Final QC)
After the manufacturing department will complete the product, stand in the customer's position on the finished product quality verification, in order to ensure the quality of customer expectations and needs.
6. OQC(Outgoing QC)
After the product sample inspection to determine the qualified, allowing storage, but when the finished product from the warehouse before the formal delivery of the goods, there is a check, this is called the shipment inspection.Check content:In the warehouse storage and transfer status to confirm, while confirming the delivery of the product is a product inspection to determine the qualified
Certifications
packaging
FAQ
1. How to choose a gearbox which meets our requirement?
You can refer to our catalogue to choose the gearbox or we can help to choose when you provide
the technical information of required output torque, output speed and motor parameter etc.
2. What information shall we give before placing a purchase order?
a) Type of the gearbox, ratio, input and output type, input flange, mounting position, and motor informationetc.
b) Housing color.
c) Purchase quantity.
d) Other special requirements.
3. What industries are your gearboxes being used?
Our gearboxes are widely used in the areas of textile, food processing, beverage, chemical industry,
escalator,automatic storage equipment, metallurgy, tabacco, environmental protection, logistics and etc.
4. Doyou sell motors?
We have stable motor suppliers who have been coperating with us for a long-time. They can provide motors
with high quality.
Send Message
