The 1212 is designed for use in low power DME applications such as micro-scooters, mini-scooters, foldable scooters, and low-end personal mobility vehicles. Although it is optimized for use on modern 3-wheel and 4-wheel mobility aid scooters, its programmable options also allow it to be used on any low power permanent magnet motor application.
Specifications:
. Nominal input voltage: 24 V
. PWM operating frequency: 15.6 kHz
. Electrical isolation to heatsink (min.): 500 V
. Minimum motor resistance: 160 mΩ (45 amp models); 120 mΩ (70 amp and 90 amp models)
. B+, B- logic pin current (max.): 9 A (pins 7 and 13 on 14-pin connector)
. KSI input current (typical): 80 mA
. Logic input current (typical): 1 mA
. Horn output current (max.): 15 mA
. Lift lockout output current (max.): 50 mA [1212P only]
. BDI output voltage, resistance (max.): 0-5 V, 10 kΩ
. LED output current (max.): 15 mA
. Electromagnetic brake coil resistance (min.): 32 Ω
. Throttle type: resistance or voltage; single-ended, inverted single-ended, wigwag, inverted wigwag, or unipolar
. Storage ambient temperature range: -40°C to 65°C (-40°F to 149°F)
. Operating ambient temp. range: -25°C to 50°C (-13°F to 122°F)
. Heatsink overtemperature: linear cutback starts at 80°C (176°F); complete cutoff at 105°C (221°F)
. Heatsink undertemperature: cutback starts at -10°C (14°F) and is reduced linearly to 50% at -25° (-13°F)
. Undervoltage cutoff: 14 V
. Overvoltage cutoff: 34 V
. Package environmental rating: ISTA 2A; electronics sealed to IPX5
. Weight 0.3 kg (0.7 lbs)
. Dimensions (W× L×H) 72 × 131 × 39 mm (2.8" × 5.2" × 1.5")
Package:Normally we use the standard exporting packaging , we also can according to clients' request .
Shipping:For sample or samll quantity,the item will be sent in 48 hours after the payment confirmed,
through an expedited service (Fedex, DHL, TNT, UPS or EMS),tracking number will be available
For large quantity,the goods will be send in 10-25 days by sea or air
Anhui Lift Top Imp. & Exp. Co., Ltd is located in Hefei city, we specializing in spare parts of material handling equipment, forklift and Golf Cart for more than 16 years experience. Product categories include controlling system, drive system, transmission system, hydraulic system, and product variety is more than 5000 relating to controllers, motors, contactors, connectors, sensors, battery charger etc. We have developed to the top supplier for fokrlift parts in the past years. And the parts we offer can meet the request of different brands forklifts in the market,such as TCM, TOYOTA, NICHIYU, NISSAN, MITSUBISHI, LINDE, HYSTER, DAEWOO, TAILIFT, HELI, JAC, BAOLI etc.
