Model NO.
BT-G335
Specification
3350mm
Trademark
BALTIC
Origin
Qingdao, China
HS Code
89031000
Production Capacity
3000sets/Year
Inflatable:
Inflatable
Color:
Color
Folded:
Folded
Seater:
4
Hull Material:
Polyethylene
Transport Package:
Carton
HIGH Speed Boats
A collapsible, inflatable boat is provided having two large inflatable tubes as hulls connected together by a floor raised above the midpoint of the hull tubes and supported by spaced-apart, laterally-extending rigid members flexible connected thereto. An inflatable, semi-tubular chamber is disposed beneath the floor the extends longitudinally of the boat midway between the hull tubes. A hinged, stainless steel rigid transom is provided at the rear of the boat, and a forward end member closes the front of the boat to permit collapsing of the boat to a relatively small package without having to remove any parts from the boat.
Photos
Standard accessories:
Towing rope, a foot pump, a repair kit, carry bag
Related products:
Material:
All BALTIC inflatable boats use 0.9mm &1.2mm, 1000 Denier polyester fabric which has been specially coated on both sides with PVC.
Properties:
Abrasion resistance:
The chemical formula of the outside PVC layer makes the material abrasive resistant and airtight properties: 200*170N/5cm(±20).
Extreme condition resistance:
Low & High temperature resistance: -30~+70ºC
Chemical resistance:
Strong resistance to Hydrocarbon, sunlight, Seawater, Oil and Fuel. Thanks to this properties which protect the material from fading and ageing.
Dimensional stability:
1%(24hrs-70ºC)
Tensile and tear strength:
3800*3550(±250)
Color available:
CE Certificate
A collapsible, inflatable boat is provided having two large inflatable tubes as hulls connected together by a floor raised above the midpoint of the hull tubes and supported by spaced-apart, laterally-extending rigid members flexible connected thereto. An inflatable, semi-tubular chamber is disposed beneath the floor the extends longitudinally of the boat midway between the hull tubes. A hinged, stainless steel rigid transom is provided at the rear of the boat, and a forward end member closes the front of the boat to permit collapsing of the boat to a relatively small package without having to remove any parts from the boat.
Photos
Standard accessories:
Towing rope, a foot pump, a repair kit, carry bag
Related products:
Material:
All BALTIC inflatable boats use 0.9mm &1.2mm, 1000 Denier polyester fabric which has been specially coated on both sides with PVC.
Properties:
Abrasion resistance:
The chemical formula of the outside PVC layer makes the material abrasive resistant and airtight properties: 200*170N/5cm(±20).
Extreme condition resistance:
Low & High temperature resistance: -30~+70ºC
Chemical resistance:
Strong resistance to Hydrocarbon, sunlight, Seawater, Oil and Fuel. Thanks to this properties which protect the material from fading and ageing.
Dimensional stability:
1%(24hrs-70ºC)
Tensile and tear strength:
3800*3550(±250)
Color available:
CE Certificate
Send Message
