Weforma WBE100-E1 Rubber Air Shocks Replacement 1 Convoluted Industrial Spring
Refer Number
Weforma: WBE 100-E1
Weforma: WBE100-E1
Weforma: WBE 100 E1
Weforma: WBE100 E1
Weforma: WBE 100E1
Weforma: WBE100E1
Contitech: FS 40-6 1/8 M8
Contitech: FS40-6 1/8 M8
Contitech: FS 40 6 1/8 M8
Contitech: FS40 6 1/8 M8
Phoenix: SP 1 B 04
Phoenix: SP1B 04
Phoenix: SP1B04
The detailed Specifications and techical data: 1B4060
The Max. Diameter: 145mm
Air hole/air inlet: G1/8
Working stroke: maximum 110mm to minimum 50mm
Top plate screw (nut) teeth:M8×1.25
Bottom plate screw (nut) teeth:2 x M8×1.25
Top cover diameter: 90mm
Bottom cover diameter: 90mm
Screw center distance: 20mm
Min. pressure: 0 bar
Return force to min.height: ≤120N
Overall weight with clamped plates: 0.9kg
Vibration isolation - dynamic characteristic values
Design Height H: recommended 90mm, minimum 70mm
| Pressure p[bar] | 3 | 4 | 5 | 6 | 7 | 8 | Vol. V[l] |
| Force(Load) [KN] | 1.7 | 2.3 | 2.8 | 3.4 | 3.8 | 4.4 | 0.5 |
| Spring rate [N/cm] | 760 | 990 | 1220 | 1480 | 1610 | 1820 | |
| Natural frequency [Hz] | 3.5 | 3.3 | 3.3 | 3.3 | 3.2 | 3.2 |
Pneumatic application-static characteristic values
Force F[KN]
| Pressure p [bar] | 3 | 4 | 5 | 6 | 7 | 8 | Vol. V [l] | |
| Height H[mm] | 100 | 1.2 | 1.6 | 2.0 | 2.5 | 3.0 | 3.4 | 0.6 |
| 90 | 1.7 | 2.2 | 2.8 | 3.4 | 3.9 | 4.4 | 0.5 | |
| 80 | 2.1 | 2.8 | 3.5 | 4.2 | 4.9 | 5.3 | 0.5 | |
| 70 | 2.3 | 3.2 | 3.9 | 4.7 | 5.4 | 6.2 | 0.4 | |
| 60 | 2.6 | 3.5 | 4.3 | 5.2 | 6.1 | 6.9 | 0.3 | |
Other types of Weforma Air Spring Replacement We could offer
WBE 300-E1;
WBE300-E1;
WBE 300-E2;
WBE300-E2;
WBE 200-E1;
WBE200-E1;
WBE 400-E1;
WBE400-E1;
WBD-G450
The reated picture of 1B4060 air spring/air ride spring/air shocks
About Air spring
The natural vibration frequency of the air spring remains almost unchanged under any load, which also makes the spring device have almost constant characteristics; the air spring has good performance of absorbing high-frequency vibration and sound insulation; it can also withstand axial loads and For radial load, different bearing capacities can be obtained by adjusting the internal pressure, which can meet the needs of various loads.
Air springs can be used in mechanical devices, such as presses, air compressors, centrifuges, vibrating conveyors, control hammers, foundry machinery and textile machinery, optical and laser instruments, integrated circuits, ultra-precision machine tools and other precision mechanical equipment and precision testing equipment, etc.
Company Profile
Guangzhou Guomat air spring Co., Ltd. was established in 2008 and is located in Guangzhou, the capital city of Guangdong Province. The company's production plant covers an area of 20,000 square meters and is located in Taihe Town, Baiyun District, Guangzhou City. With the continuous development of the company, it is gradually equipped with modern workshops and advanced rubber air spring equipment. It is one of the important air spring production bases in China. At the same time, Gomart used domestic advanced air spring processing equipment and introduced foreign air spring production technology, combined with the company's unique production process, and strictly implemented production in accordance with international standards to produce advanced products. All products comply with ISO9001, ISO/IS16949 standards.
The main products of Guangzhou Guomat air spring Co., Ltd. are: rubber air springs, air suspension springs, rubber air springs for automobiles, airbags for passenger cars and trucks, industrial air springs, etc. The products cover buses, luxury cars, trucks, Commercial vehicles, rail vehicles, industrial machinery, industrial equipment and other industries. The company has hundreds of models and styles of products. At the same time, it can also carry out directional transformation and design of products according to the special needs of users, providing users with one-stop service.
Factory workshop
FAQ
Q1:Can you produce the product according to the samples?
A: Yes, we can produce by your samples or technical drawings. We can build the molds and fixtures.
Q2: What is your sample policy?
A: We can supply the sample if we have ready parts in stock, but the customers have to pay the sample cost and the courier cost.
Q3: What certification does your product pass?
A: Our products are certified to ISO/TS16949:2009 international quality standards. Please rest assure that we have very strict Quality Control Systems.
Q4 : Can I use my own logo?
A:Sure. We can do as per the customer's requirements.
