Fire-stone Bellow 131 Style Industrial Convoluted Offset Air Inlet Springs
Refer Number
Fire-stone Bellow 131
Fire-stone Flex 131
1B5080 Specifications and Tecnical Data
1. Nut/blind nut Top plate screw (nut) teeth: 2 x M10×1.5
Top plate screw center distance: 44.5mm
2. Bottom cover plate screw (nut) teeth:2 x M10×1.5
Bottom plate screw center distance : 44.5mm
2. Air hole/air inlet/air fitting air hole/air inlet: 1/4NPTF and the center distance between nut and air inlet: 22.2mm
3. Top plate diameter (width): 115 mm, bottom cover diameter (width): 115 mm bell-shaped rubber bellows rubber bellows MAX. diameter:165mm
4. Height: Min. 50mm to Max. 120mm
5. Bumper block/bumper block without bumper
6. Belt loop/Girdle Ring/Girdle Hoop: without belt loop/girdle ring/girdle hoop
Packing Details
| Model Size | Net Weight | Gross Weight | Box Weight | Box Size | Quantity |
| 1B5080 | 1.448kg | 17.956kg | 0.58kg | 33*33*22cm | 12 |
Application
Paper Sizing Press
glue applicator
Pressure rolls for calenders
missile assembly jig
Gate valve operator
Web Assembly Machine
forming press
cable tensioner
Mold Separator
Knife spring adjuster
Flattener
Roller friction brake
Straightening machine
Bronzing machine
Belt lift tensioner
Special paper press roll
leather machinery
hopper
carton sealer
Industrial washing machine
Precision instrument table
Pipe Thread Maker
conveyor
Fan and Motor
The following six points should be paid attention to when using rubber air springs
1. Use air pressure
2. Use itinerary
3. Installation
4. Storage
5. Replacement and replacement
6. Avoid oil locations touching the surface of the air spring
Common faults of air springs
1. Air spring skew, eccentric contact of cushion
The air spring is not installed correctly, and the air spring is skewed longitudinally.
The suspension was installed incorrectly and the air springs were skewed laterally.
The positioning adjustment block on the frame bracket is welded or the rubber bushing in the pin ear is damaged, causing the suspension to drift.
2. Air sac
Premature aging due to grease, etc. on the airbag.
normal aging
3. Decreased elasticity
The water vapor in the air storage tank was not released in time, and more and more water accumulated in the air spring.
4. Air spring surface is worn or worn through
Insufficient clearance around the air spring and friction with other parts
Damaged shock absorbers, loose pipelines, etc. cause interference and friction with airbags
There is sand, glass slag, etc. on the outside of the piston of the air spring base
The picture of 1B5080 Air Shocks
Company Profile
Guangzhou Guomat air spring Co., Ltd. was established in 2008 and is located in Guangzhou, the capital city of Guangdong Province. The company's production plant covers an area of 20,000 square meters and is located in Taihe Town, Baiyun District, Guangzhou City. With the continuous development of the company, it is gradually equipped with modern workshops and advanced rubber air spring equipment. It is one of the important air spring production bases in China. At the same time, Gomart used domestic advanced air spring processing equipment and introduced foreign air spring production technology, combined with the company's unique production process, and strictly implemented production in accordance with international standards to produce advanced products. All products comply with ISO9001, ISO/IS16949 standards.
The main products of Guangzhou Guomat air spring Co., Ltd. are: rubber air springs, air suspension springs, rubber air springs for automobiles, airbags for passenger cars and trucks, industrial air springs, etc. The products cover buses, luxury cars, trucks, Commercial vehicles, rail vehicles, industrial machinery, industrial equipment and other industries. The company has hundreds of models and styles of products. At the same time, it can also carry out directional transformation and design of products according to the special needs of users, providing users with one-stop service.
Factory workshop
FAQ
Q1:Can you produce the product according to the samples?
A: Yes, we can produce by your samples or technical drawings. We can build the molds and fixtures.
Q2: What is your sample policy?
A: We can supply the sample if we have ready parts in stock, but the customers have to pay the sample cost and the courier cost.
Q3: What certification does your product pass?
A: Our products are certified to ISO/TS16949:2009 international quality standards. Please rest assure that we have very strict Quality Control Systems.
Q4 : Can I use my own logo?
A:Sure. We can do as per the customer's requirements.
