Contitech FS 530-14 1/4NPTF One Convoluted Rubber Air Ride Spring
Cross Reference
Contitech FS 530-14
Contitech FS 530 14
FleetPride AS7103
Fire-stone Style 113
Fire-stone. W01-358-7103
Fire-stone. W01 358 7103
Fire-stone. W013587103
Fire-stone. WO1-358-7103
Fire-stone. WO1 358 7103
Fire-stone. WO13587103
Goodyear 1B14 350
Goodyear 1B14-350
Goodyear 1B14350
Goodyear Flex No. 578913351
Taurus 6326
Triangle AS-4442
Triangle AS 4442
Triangle AS4442
TRP AS71030
Peerless 0550 00015&
Peerless 0550-00015&
Peerless 055000015&
Specifications and Detailed Technical Parameters:AIRSUSTECH 1B53014
Nut/blind nut
Top plate screw (nut) teeth: 4X3/8-16UNC
The screw center distance of the top cover plate: 158.8mm
Screw (nut) teeth of the bottom cover plate: 4X3/8-16UNC
The screw center distance of the bottom cover plate: 158.8 mm
Air hole/air inlet/air fittings
Air hole/air inlet: 1/4NPTF
Cover plate
Top plate diameter: 289 mm
Diameter of the bottom cover: 289 mm
Bell rubber bellows
Maximum diameter of rubber bellows: 406 mm
Natural diameter of rubber bellows: 350 mm
Working stroke: minimum 81 mm to maximum 160 mm
Maximum height: 160 mm
Minimum height: 81 mm
Bumper block/bumper block
No bumper block
Belt loop/Belt loop/Girdle hoop
With belt loop: No belt loop/girdle hoop
Min pressure: 0 bar
Return force to min. height: ≤300N
Overall weight with clamped plates: 6.1kg
Vibration isolation - dynamic characteristic values Design height H: recommended 150mm, minimum 120mm | |||||||
| Pressure p [bar] | 3 | 4 | 5 | 6 | 7 | 8 | Vol. V [l] |
| Force (Load) [kN] | 18.6 | 24.9 | 31.5 | 37.9 | 44.4 | 50.8 |
11.0 |
| Spring rate [N/cm] | 3650 | 4410 | 5340 | 6140 | 7220 | 7920 | |
| Natural frequency [Hz] | 2.2 | 2.1 | 2.1 | 2.0 | 2.0 | 2.0 | |
1B53014 Pneumatic application - static characteristic values Force F [kN] | ||||||||
| Pressure p [bar] | 3 | 4 | 5 | 6 | 7 | 8 | Vol.[l] | |
| Height H [mm] | 160 | 17.1 | 23.0 | 29.0 | 35.0 | 41.0 | 47.3 | 11.8 |
| 140 | 20.0 | 26.8 | 33.7 | 40.6 | 47.7 | 54.5 | 10.7 | |
| 120 | 22.3 | 29.8 | 37.3 | 44.9 | 52.7 | 60.2 | 9.5 | |
| 100 | 24.1 | 31.9 | 40.0 | 48.1 | 56.3 | 64.3 | 8.2 | |
| 80 | 25.3 | 33.4 | 41.9 | 50.3 | 58.8 | 67.1 | 6.6 | |
| 60 | 26.0 | 34.5 | 43.4 | 52.0 | 60.8 | 69.1 | 4.6 | |
Matters needing attention in the use of rubber air springs
1. Use itinerary
During the use of the rubber air spring, it should be ensured that the allowable stroke of the air spring should not be exceeded. Exceeding the allowable stroke will seriously affect the service life of the rubber air spring. Please refer to the Rubber Air Spring Performance Data Sheet for the allowable travel of each rubber air spring.
2. Storage
Rubber air springs should be stored in a dry, cool and ventilated environment. At the same time, avoid oily substances contacting the surface of the air spring.
The related picture of 1B53014
Company Profile
Guangzhou Guomat air spring Co., Ltd. was established in 2008 and is located in Guangzhou, the capital city of Guangdong Province. The company's production plant covers an area of 20,000 square meters and is located in Taihe Town, Baiyun District, Guangzhou City. With the continuous development of the company, it is gradually equipped with modern workshops and advanced rubber air spring equipment. It is one of the important air spring production bases in China. At the same time, Gomart used domestic advanced air spring processing equipment and introduced foreign air spring production technology, combined with the company's unique production process, and strictly implemented production in accordance with international standards to produce advanced products. All products comply with ISO9001, ISO/IS16949 standards.
The main products of Guangzhou Guomat air spring Co., Ltd. are: rubber air springs, air suspension springs, rubber air springs for automobiles, airbags for passenger cars and trucks, industrial air springs, etc. The products cover buses, luxury cars, trucks, Commercial vehicles, rail vehicles, industrial machinery, industrial equipment and other industries. The company has hundreds of models and styles of products. At the same time, it can also carry out directional transformation and design of products according to the special needs of users, providing users with one-stop service.
Factory workshop
FAQ
Q1:Can you produce the product according to the samples?
A: Yes, we can produce by your samples or technical drawings. We can build the molds and fixtures.
Q2: What is your sample policy?
A: We can supply the sample if we have ready parts in stock, but the customers have to pay the sample cost and the courier cost.
Q3: What certification does your product pass?
A: Our products are certified to ISO/TS16949:2009 international quality standards. Please rest assure that we have very strict Quality Control Systems.
Q4 : Can I use my own logo?
A:Sure. We can do as per the customer's requirements.
