Rubber Double Convoluted Air Spring Contitech G1/2 Air Inlet FD120-17
Refer No.
| Contitech FD120-17 |
| Contitech FD12017 |
| Contitech FD120 17 |
| Contitech FD 120-17 |
| Contitech FD 120 17 |
| Contitech FD 12017 |
Specifications and Detailed Technical Parameters: 2B12017
- Nut/blind nut
Screw (nut) teeth of the bottom cover plate: 2×M8×1.25
- Air hole/air inlet/air fittings
- Cover plate
The Diameter Of The Bottom Cover: 135mm
- Bell rubber bellows
Height: 167mm
- Bumper block/bumper block
- Belt loop/Belt loop
With one piece of belt loop
The related picture of 2B12017
About Air Spring
Air spring is a sealed container filled with compressed air, using the compressibility of gas to achieve its elastic effect. Commonly known as air bag, air bag cylinder, cylinder and so on.
2B12017 can replace Contitech FD120 17. They have It is a double convoluted air - bag spring. It consists of a rubber air bag with cord and compressed air enclosed in it. The inner layer of the airbag is made of air-tight rubber, while the outer layer is made of oil-resistant rubber. A steel waist ring between the joints prevents radial expansion of the middle part and prevents friction between the two joints. In addition to the two, there are single, three and four convoluted air springs. The more nodes, the better the elasticity.
Advantage
1. Precise control precision: the air spring shock absorber provides precise height control by adjusting the internal air pressure. This feature eliminates fatigue and one-time setup problems common in other types of isolators.
2. Prolong the life of equipment: air spring shock absorber because of its special shock absorption principle, reflects a great advantage in the maintenance of equipment, when the traditional steel spring is impacted, will produce the phenomenon of self-vibration, the frequency of self-vibration can be directly transmitted to the equipment, resulting in loosening and damage of equipment. Air spring damping is much better, and it is even possible to achieve complete damping, significantly reducing equipment maintenance costs and extending equipment life
3. Wide range of action: air spring shock absorber vibration isolation load at each installation point from 10KG to more than 10 tons, can meet a variety of different production requirements. (Guomat air spring as an example, there may be differences between brands)
4. Superior shock absorption: Air spring shock absorbers provide superior vibration isolation among all types of vibration absorbers. The natural frequency of the system can be as low as 1 hz. The system's natural frequency can be even lower if an additional air storage chamber is added. In order to achieve the same effect, the static deformation of traditional spiral spring shock absorbers should be at least 230 mm.
5. Small footprint: Air spring shock absorbers can withstand the above loads at mounting heights as low as 50mm for vibration reduction. To achieve the same vibration isolation effect, the helical spring requires a free height of 135 mm to 645 mm. (Take Guomat air spring as an example, each brand may vary)
6. The use effect is stable: the air spring shock absorber is unique in that the natural frequency of the system does not change significantly when the load changes. This characteristic, combined with precise height control, makes it particularly suitable for mounting air spring shock absorbers at various mounting points on equipment with uneven loads.
7. Effective noise reduction: Air spring shock absorbers can effectively reduce the transmission of noise through the structure. Air spring shock absorbers themselves also do not produce noise because they do not have the flutter problems of traditional helical springs.
8. Wide use: air spring shock absorber can not only be used to protect the mechanical structure parts which produce vibration, but also widely used to isolate the vibration transmitted to precision machinery through the structure.
Company Profile
Guangzhou Guomat air spring Co., Ltd. is a domestic innovative enterprise dedicated to the research and production of automotive air springs. It is located in the beautiful flower city of Guangzhou. With modern workshops and advanced rubber air spring manufacturing equipment, it is one of the current air spring production bases in China. Our products are mainly used in the bases of commercial vehicles, passenger cars, and industrial machinery and equipment. The main products are: rubber air springs, passenger car and truck airbags, industrial airbags, air springs for papermaking machinery, large washing machines, rubber air springs for cars, etc. There are thousands of models and styles, and can also be customized according to customer requirements. Or the customer's existing product specifications to design and produce.
Factory workshop
FAQ:
Q1. Can you produce according to the samples?
A: Yes, we can produce by your samples or technical drawings. We can build the molds and fixtures.
Q2. What is your sample policy?
A: We can supply the sample if we have ready parts in stock, but the customers have to pay the sample cost and the courier cost.
Q3. Do you test all your goods before delivery?
A: Yes, we have 100% test before delivery.
