Baltic Rib 470 W Hypalon Fiberglass Luxury Yacht Boat Tender, Fiberglass Luxury Yacht, Rib Boat Tender

The BALTIC RIB470W is equipped with a solid rigid hull (bottom) for use as tenders aboard powerboats and yachts, as well as for recreation.

The strong fiberglass hull in combination with 1.2mm PVC inflatable buoyancy tubes gives these boats a smooth, dry ride, high reliability and safety in navigation.

Always ready for the journey, delighting the eye with its well-designed hull, a BALTIC Tender deserves a prominent place in your travel plans.

-Special anti-skd deck surface
transom drain valve ensure absence of water on the boat deck and allow to walk freely inside without without fear of slipping
-another drain valve allows quick drainage of the water from the space between the hull and the deck
-built-in bow cabin of increased capacity
-towing ring under the bottom
-4x suspension brackets embedded into the rigid hull
-wide reinforced rubbing strake
-special foundry-cast portage handles along both sides
-All around lifelines to serve as support for passengers as well as for carrying the boat by hand.
-This RIB470W can be equipped with personal watercraft style sport console(optional), It can also be equipped with a deluxe console and seating.
-Alternatively, the inflatable tubes of the boats of this RIB can be manufactured from the most up-to-date HYPALON material.
all this consititutes the list - far from being complete of the base design characteristics on this RIB470W

More yacht tenders:
 


Why Should You Buy BALTIC RIB?

BALTIC RIBs inflatable tubes are made with high quality PVC or Hypalon and the seams are Hot Air Welded. All of our boats tubes are put through inflation tests, air retention tests, and quality checks before being packed and shipped. This adds up to make a dependable boat with great performance for years to come. And the hulls are made of Ashland Marine resin with the high strength fiberglass fabric, which give the BALTIC RIBs very good performance with very little deformation.

BALTIC maintains a meticulous manufacturing process focused on quality control, including pressure, leak and stretch tests throughout the boat's construction. Our team is constantly improving our inflatable boat designs and manufacturing quality controls to create superior inflatable boat products.

Frequently Asked Questions:

1. How many people can it sit comfortably? - Max seating is 8.

2.  Is it possible to order a sample? - Yes, definitely it is. We can design the sample as your requirements.

3. How should I store my dinghy? - Clean, dry, deflate, roll up and store in a climate controlled environment. If inflated, use a cover to protect it from UV rays and do your best to keep it out of direct sunlight, heat, humidity and extreme colds.

4. What kind of wear and tear should I watch for? -Besides a small leak or tear you should check around all the valves and seams once in a while to make sure they are secure and not leaking any air. You can do this by using the same soap and water mixture in a spray bottle. Other wear and tear to be aware of is any breaking down of the material or stains that should eventually be removed with a cleaner.

5. How do I know if my dinghy is fully inflated? - The supplied foot pump is designed NOT to over-inflate the boat. Pump until air is no longer being pushed into the chamber and all wrinkles are gone..

Always ready for the journey. delighting the eye with its well-designed hull, a BALTIC yacht dinghy deserves a prominent place in your trevel plans.