Clutch Bearing 614114/ Non-Standard Sized Bearing/China Factory, Clutch Bearing, 614114

Clutch bearing/Non-standard bearing 614114

Technology utilized for the production of the bearings provides significant advantages to customers due to minimal maintenance costs. Each bearing should have longer life span and should operate without any problems during the exploitation. However, it should be noted that certain external factors affect the quality of bearings as well. They should not be exposed to excessive heat and must be protected from ingress of foreign matter. Also, Bearings must be properly lubricated.

Modern ball bearings stand up to growing demands of operation in difficult conditions with increased productivity. Further development trends set demands for longer exploitation life under harsh conditions and more cost-effective design for agricultural machinery. VAFEM bearings provide cost-effective solutions and are extensively applied in agricultural machinery production. These bearings are quick and easy to mount. Wide inner ring can be mounted on the shaft by the eccentric ring, screws or adapter sleeves. Seals are specially designed and fitted to the outer rings. The advantages of these bearings have led to their rapid adoption by manufacturers of agricultural machinery.

Each VAFEM bearing is produced in accordance with strict premium quality standards.
-VAFEM bearing units consist of a housing which is made from either cast iron or pressed steel; The insert bearings inside have a self-aligning feature due to their spherical outer diameters and the corresponding design of the bearing housing. This feature allows for any static misalignment.


--Various seals design is available, typically single, triple lips, as well as six lips are available based on different bearing arrangement and requirements for each application.
-Rings and ball Material, Rubber Seal, Grease, as well as internal design of bearings are carefully selected.
- When low temperature is required, we have solution to meet with it.
-When axial load is required, we have design of four point contact bearing to meet with it.

Also we can also provide design solution to meet with customer requirements, and we have been proven successful in helping OEM customers to provide comparable performance with more economical VAFEM bearings.