Fuel
Petrol
Transport Package
Frame and Seaworthy Packing
Specification
6.85m*2.45m
Trademark
Gospel Boat
Origin
China
Production Capacity
30 Units /Month
Inflatable:
Not Inflatable
Color:
Color
Folded:
Unfolded
Seater:
8
Hull Material:
Aluminum
Engine:
Outboard
Product Description
| STANDARDS | |||
| Bow Rollor | √ | Rocket launcher | √ |
| Fast draining Anchor well | √ | Folding rear seat | √ |
| Storage pockets fore,aft and sides | √ | hardtop roof with rod rack | √ |
| Safety Windscreen/ Scuttle | √ | Quality driver seat | √ |
| Extruded Side Decks | √ | Floor:aluminum plate with carpeted | √ |
| Transducer mounting plate | √ | Center Cabin with walking round | √ |
| Bilge Pump | √ | Battery Box(two) | √ |
| Large buoyancy tanks(5) | √ | Dive/swim rear ladder | √ |
| Bait board with rod holders | √ | Aluminum rod holders(in deck) | √ |
| Double Chiles | √ | Self draining deck with scuppers | √ |
| Fuel tank | 300L | Rails (front,transom) | √ |
| kill tank | 60L | Painting | √ |
| Live bait tank | 30L | ||
| Options | |||
| Hydraulic steering | Tiolet | ||
| LED Navigation light | Electric Trim Tabs | ||
| LED cabin light | Switch control Panel | ||
| LED Anchor light | Electric winch | ||
| Berley bucket | Anti slip painting | ||
| Washing down pump | Compass | ||
| Cushions (cabin) | hardtop with closed windscreen | ||
| Cabin Door | Synthetic teak floor | ||
| Radar | VHF | ||
Manufacturing Technology
1.All of our fishing & working boat are made of Marine-grade aluminum 5083-h116 with China Ship Classification society ( CCS )
2.Welding Specification :
1) TIG and MIG are to be adopted for this ship .
2) The ultrasonic inspection to be carried out for the cross joint of seam and other important place .
3) From 5083-H116 material to welding wires to welding use gas & experienced qualified welders .
4) The bottom is double bottom system and constructed on the longitudinal system of framing .
5) Solid floors will be provided at every frame station , the side transverse frames will be fitted at a space of 500mm ."
1) TIG and MIG are to be adopted for this ship .
2) The ultrasonic inspection to be carried out for the cross joint of seam and other important place .
3) From 5083-H116 material to welding wires to welding use gas & experienced qualified welders .
4) The bottom is double bottom system and constructed on the longitudinal system of framing .
5) Solid floors will be provided at every frame station , the side transverse frames will be fitted at a space of 500mm ."
3.The Core Features Of Our safe Design
1) The Whole hull structure Manual bilge pump system
2) The underfloor fuel tank with cutoff valves and fuel inspection hose with heavy duty fuel hoses .
3) Balance testing , Flotation and deck water-Tight and flotation testing make sure 100% safe "
2) The underfloor fuel tank with cutoff valves and fuel inspection hose with heavy duty fuel hoses .
3) Balance testing , Flotation and deck water-Tight and flotation testing make sure 100% safe "
Factory Information
Send Message
