Fuel
Petrol
Transport Package
Frame and Seaworthy Packing
Specification
6.25m*2.25m
Trademark
Gospel Boat
Origin
China
Production Capacity
30 Units /Month
Inflatable:
Not Inflatable
Color:
Color
Folded:
Unfolded
Seater:
6
Hull Material:
Aluminum
Engine:
Outboard
| MEASUREMENTS | 6.25m fishing boat | ||
| Boat hull length | 6m | Transom Shaft | 25'' |
| Beam (m) | 2.25 | Weight(boat only kg) | 1050kg |
| Depth(m) | 1.35 | Min. HP | 115 |
| Hull Thickness(mm) | 5 | MAX. HP | 150 |
| Tube Thickness(mm) | 3 | Number of people(Basic) | 6 |
| STANDARDS | 625 Full Cabin | ||
| Live Bait Tank | √ | hardtop lights (LED) | √ |
| Bollard Foredeck | √ | Bilge pump | √ |
| Cleats X 4 Stern and Midship | √ | sliding window | √ |
| Alloy Fairlead and Roller | √ | Ladder (T-bar single step) with | √ |
| Lights Navigation and Mast. LED | √ | Drink Holders | √ |
| Rod Holders in pontoons | √ | Single Engine Pod 25 Inch | √ |
| Side Pontoon Storage Trays | √ | Transducer Mount Bracket | √ |
| Switch control Panel | √ | Battery swich | √ |
| Hatch Offshore Foredeck | √ | Seats rear fold down | √ |
| Rocket Launcher (7) rod rack | √ | Transom Wave Deflector | √ |
| Grab Rail Roof rooftop and rear cabin X3 | √ | transducer Mount Bracket | √ |
| Grab rails dash and inside roof X3 | √ | Fuel tank | 150L |
| Bunks Cabin with Squabs (Vinyl) | √ | Painting(two stones) | √ |
| Seat Softrider Pedestal Driver with slider | √ | Battery and oil tank shelf/com | √ |
| Options | |||
| Steering - Hydraulic | Anchor winch | ||
| Washing pump system | VHF | ||
| Carpeted cabin hardtop and dash | Electric trim tabs | ||
| Teak floor | Marine Compass | ||
| Anchor ,Chain & Warp | Trailer | ||
Manufacturing Technology
1.All of our fishing & working boat are made of Marine-grade aluminum 5083-h116 with China Ship Classification society ( CCS )
2.Welding Specification :
1) TIG and MIG are to be adopted for this ship .
2) The ultrasonic inspection to be carried out for the cross joint of seam and other important place .
3) From 5083-H116 material to welding wires to welding use gas & experienced qualified welders .
4) The bottom is double bottom system and constructed on the longitudinal system of framing .
5) Solid floors will be provided at every frame station , the side transverse frames will be fitted at a space of 500mm ."
1) TIG and MIG are to be adopted for this ship .
2) The ultrasonic inspection to be carried out for the cross joint of seam and other important place .
3) From 5083-H116 material to welding wires to welding use gas & experienced qualified welders .
4) The bottom is double bottom system and constructed on the longitudinal system of framing .
5) Solid floors will be provided at every frame station , the side transverse frames will be fitted at a space of 500mm ."
3.The Core Features Of Our safe Design
1) The Whole hull structure Manual bilge pump system
2) The underfloor fuel tank with cutoff valves and fuel inspection hose with heavy duty fuel hoses .
3) Balance testing , Flotation and deck water-Tight and flotation testing make sure 100% safe "
2) The underfloor fuel tank with cutoff valves and fuel inspection hose with heavy duty fuel hoses .
3) Balance testing , Flotation and deck water-Tight and flotation testing make sure 100% safe "
Factory Information
We are a professional boat manufacturer with advcanced technology and rich experience.
Our products including fishing boat,landing craft,patrol boat,diving boat,passenger boat,rescue boat,fire fighting boating and so on.
It is not about lucky in sailing but we believe that the performance when it matters.
Our products including fishing boat,landing craft,patrol boat,diving boat,passenger boat,rescue boat,fire fighting boating and so on.
It is not about lucky in sailing but we believe that the performance when it matters.
Send Message
