Model NO.
LCB-29
Engine Type
Outboard
Floor
Aluminum Floor
Overall Length
17′
Number of Passengers
4people
Bottom Width
60"
Usage
Fishing/Working/Landing Craft
Bottom Thickness
190
Length (M)
5.08 M
Beam
12 FT (3.6 M)
Fuel
300 Gallons
Power
YAMAHA 300 HP X 2
Propulsion
Outboard (30" Shaft)
Weight (Empty Tank, Without Engine)
1500lbs
Transport Package
as The Clients′ Requirement
Specification
17′
Trademark
kinlife
Origin
China
Production Capacity
50unit/Month
Inflatable:
Not Inflatable
Color:
Silver
Folded:
Unfolded
Seater:
4
Hull Material:
Aluminum
Material:
Aluminum
The FSP-40 Landing Craft Centre Console is an ideal boat for those looking to bring their ATV to a remote area, or forthose with water access property. Built with a high bow door and vee bottom, these boats will go where any other model
of boat will go....and then some!
1 x Welded aluminum stand-up console with windshield, shelf & door
1 x 4-way waterproof switch on dash 4 x 9″ welded aluminum cleats
1 x 12 V power socket with USB port & LED light
1 x Battery - single SRM 24 with wiring, breaker & box
1 x Bilge pump - 1250 GPH - manual on/off
1 x Brackets for transducer & sacrificial anode
1 x Chines & gunnels fully welded
1 x Closing storage in transom (locking battery compartment)
1 x Drop down bow door (ramp) with hand winch, single pulley system on bow door, safety lock & gasket
1 x External motor bracket for single 25″ engine with auxiliary mount and full width platform
1 x Fish box in rear gunnel with cutting board
1 x Flotation - closed cell polyurethane spray foam under decks & gunnels
1 x Fuel tank - built in under deck
1 x Fully welded self-bailing aluminum cockpit deck with inspection hatches for fuel connections and wire ways
1 x Heavy duty custom hull graphic 1 x Horn - twin compact (stainless steel)
1 x Hydraulic steering -single engine - single station
1 x Keel guard on hull bottom (beaching wear strip) 3 x Drain plugs
1 x Navigation lights (LED)
1 x Non-skid paint on aluminum deck 1 x Side storage trays - full length
1 x Storage bench seat (vented) with vinyl upholstered cushion & backrest 4 x Tie-downs (flush) on deck
1 x Under deck storage compartment in cockpit deck 3 x Welded bow & transom eyes with stainless steel inserts
1 x Wide walk-around gunnels
1 x 4-way waterproof switch on dash 4 x 9″ welded aluminum cleats
1 x 12 V power socket with USB port & LED light
1 x Battery - single SRM 24 with wiring, breaker & box
1 x Bilge pump - 1250 GPH - manual on/off
1 x Brackets for transducer & sacrificial anode
1 x Chines & gunnels fully welded
1 x Closing storage in transom (locking battery compartment)
1 x Drop down bow door (ramp) with hand winch, single pulley system on bow door, safety lock & gasket
1 x External motor bracket for single 25″ engine with auxiliary mount and full width platform
1 x Fish box in rear gunnel with cutting board
1 x Flotation - closed cell polyurethane spray foam under decks & gunnels
1 x Fuel tank - built in under deck
1 x Fully welded self-bailing aluminum cockpit deck with inspection hatches for fuel connections and wire ways
1 x Heavy duty custom hull graphic 1 x Horn - twin compact (stainless steel)
1 x Hydraulic steering -single engine - single station
1 x Keel guard on hull bottom (beaching wear strip) 3 x Drain plugs
1 x Navigation lights (LED)
1 x Non-skid paint on aluminum deck 1 x Side storage trays - full length
1 x Storage bench seat (vented) with vinyl upholstered cushion & backrest 4 x Tie-downs (flush) on deck
1 x Under deck storage compartment in cockpit deck 3 x Welded bow & transom eyes with stainless steel inserts
1 x Wide walk-around gunnels
Seating capacity | Standard Boat Weight | Beam Width | Fuel Tank: | Length |
4 | 1,500 lbs | 60" | 20 Imp Gallons | 17′ |
Send Message
