Model NO.
AAROT120
Transport Package
Inner Box, Outer Carton...Pallet
Specification
CE, ROHS, SGS
Trademark
VPC Pneumatic
Origin
China
HS Code
8481804090
Production Capacity
500000PCS/Month
Material:
Plastic
Certification:
ISO10012, BSCI, GMP, GSV, ISO13485, OHSAS18001, ISO14001, ISO/TS16949, ISO9001
Car Make:
Volkswagen, WuLing, Benz, BMW, Hyundai, Honda, Toyota, Jeep, Nissan, Ford, Buick, Chevrolet, Cadillac, Geely, Roewe, Audi, Peugeot, Lexus, Volvo, Mazda, Kia
Position:
Front
OEM:
Yes
Type:
Buffer for Suspension
Air Ride Suspension Manifold Valve 1/2"npt Fast Air Bag Control fbss 250psi Max
Compatibility:
AccuAir e-Level Ride Height Sensor & Plastic Arm
No Linkage Or Hardware
AccuAir Ride Height Sensor & Plastic Arm Only
OEM#:
AA-SENSROT-120
Compatibility:
AccuAir e-Level Ride Height Sensor & Plastic Arm
No Linkage Or Hardware
AccuAir Ride Height Sensor & Plastic Arm Only
OEM#:
AA-SENSROT-120
| Item SpecSifics | |
|---|---|
| Condition : | New |
| Manufacturer Part Number : | AA-ROT-120 |
| Brand : | Unbranded |
| Other Part Number : | AI-AA-ROT-120 |
| Included Hardware : | Mounting Hardware |
| Interchange Part Number : | e-level plastic arm replacement lowrider |
| Fitment Type : | Direct Replacement |
| FIT : | AccuAir |
Air Ride Suspension Manifold Valve 1/2"npt Fast Air Bag Control fbss 250psi Max
"V2" Manifold Air Valve
Two Dedicated 1/2"npt Inputs for Maximum Air Supply
No Tee Fittings Needed To Run Analog Or Digital Gauges
No Tee Fittings Needed Between Inflate And Deflate Valve
Using Less Fittings Means Quickest Response Times And Fewer Places To Leak
Controls 4 Bags Independently
Includes Dedicated Air Gauge Ports
12 Volt
250 PSI Max
16MM (5/8") Orifice With 1/2"npt Threads
DC12V Solenoid Valve Manifold for Air Ride Suspension
Specifications
1. Factory Direct
2. Pre-wired with fittings
3. Using the import Deutsch & Molex connector.
4. Inflates and deflates up to (4) individual Air Springs
5. Good replacement to Accuair AA-VU4 Air suspension valve block and Robbion Type solenoid valve
"V2" Manifold Air Valve
Two Dedicated 1/2"npt Inputs for Maximum Air Supply
No Tee Fittings Needed To Run Analog Or Digital Gauges
No Tee Fittings Needed Between Inflate And Deflate Valve
Using Less Fittings Means Quickest Response Times And Fewer Places To Leak
Controls 4 Bags Independently
Includes Dedicated Air Gauge Ports
12 Volt
250 PSI Max
16MM (5/8") Orifice With 1/2"npt Threads
DC12V Solenoid Valve Manifold for Air Ride Suspension
Specifications
1. Factory Direct
2. Pre-wired with fittings
3. Using the import Deutsch & Molex connector.
4. Inflates and deflates up to (4) individual Air Springs
5. Good replacement to Accuair AA-VU4 Air suspension valve block and Robbion Type solenoid valve
| Technical Specifications: | |
| Compatible Suspension Type | 4-Corner Full Air Suspension |
| Voltage Requirements | 10.5-16 Volts |
| Current Requirements | 1.1 Amps (for each of the (8) Valves) |
| Connectors | IP67 certified (immersion up to 3 ft) |
| Fitting Size | 3/8"NPT (x 8), 1/4" NPT (x 4) |
| No. of Inlet Ports | 2 |
| No. of Exhaust Ports | 2 |
| Max Operating Pressure | 200 psi |
| Cv Flow Factor | 0.33 |
| Average Adjustment Time | 2.2 Seconds |
AccuAir e-Level Ride Height Sensor & airmaxxx Billet Aluminum Arm
No Linkage Or Hardware
AccuAir e-Level Ride Height Sensor & Plastic Arm
No Linkage Or Hardware
AccuAir Ride Height Sensor & Plastic Arm Only
AA-SENSROT-120
Send Message
